Durability of Concrete Made with Coal Bottom Ash Portland Cements
Open Access
Abstract
The Portland cement industry, responsible for approximately 7.4% of global anthropogenic carbon dioxide emissions, must balance rising cement demand with ambitious greenhouse gas reduction targets. In parallel, the rapid accumulation of industrial solid waste highlights the need for effective valorization routes. Reducing the clinker factor remains a powerful measure to mitigate climate impacts in the cement sector. This study evaluates the durability of concretes made with ground coal bottom ash (CBA), a newly standardized Portland cement constituent, using the depth of penetration of water under pressure test (EN 12390-8). The experimental results show that concretes produced with CEM II/B-Z and CEM II/C-M cements meet both average (≤30 mm) and maximum (≤50 mm) water penetration criteria for mass, reinforced, and prestressed concrete across all EN 206-1 exposure classes. Concretes made with CEM VI (S-L) and CEM VI (S-Z) comply for XS1, XS2, XD, XA1, XM, and XF classes. However, for XS3, XA2, and XA3, compliance (≤20 mm and ≤30 mm) is not achieved when using mix design B (300 kg/m3, w/c = 0.50). These findings provide robust technical evidence supporting CBA as a viable cement constituent that enhances durability while enabling clinker factor reduction.Keywords
Funding Information
- IECA (E/LC-24131/EM)
This publication has 26 references indexed in Scilit:
- Hydration and physico-mechanical characterization of bottom ash-based cementConstruction and Building Materials, 2024
- Evaluation of mechanical properties and leaching tests results of mortars containing waste bottom ash as replacement of cementJournal of Material Cycles and Waste Management, 2024
- Effect of using glass powder as cement replacement on rheological and mechanical properties of cement pasteConstruction and Building Materials, 2018
- Heat-treated palm oil fuel ash as an effective supplementary cementitious material originating from agriculture wasteConstruction and Building Materials, 2018
- High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cementConstruction and Building Materials, 2017
- High-volume fly ash paste for developing ultra-high performance concrete (UHPC)Ciência & Tecnologia dos Materiais, 2017
- Effect of silica fume fineness on the improvement of Portland cement strength performanceConstruction and Building Materials, 2015
- A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particlesConstruction and Building Materials, 2013
- Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement typesCement and Concrete Research, 1988
- Optimized determination of PFA (fly ash) fineness with reference to pozzolanic activityCement and Concrete Research, 1980