Influence of an Iron Fuel Additive on Diesel Combustion
Authors:
- 23 February 1998
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This program used a 0.6 liter DI NA single cylinder diesel engine to study the influence of ferrocene as a fuel additive on particulate and NOx emissions and heat release rates. Previous Studies1,15 have shown efficiency and particulate emission benefits only after engine conditioning. Two engine configurations were tested: standard aluminum piston with normal engine deposits and a second test with the engine cleaned to “new engine condition”, but with the piston replaced with a thermal barrier coated piston. Particle concentration and size in roughly the 7.5 to 750 nm diameter range were measured with a condensation nucleus counter and an electrical aerosol analyzer. Heat release rates and IMEPs were calculated from in-cylinder pressure data. Particle number concentrations increased substantially when the 250 ppm dose was first started with both engine configuration, but decreased 30% to 50% with conditioning. Nanoparticle concentrations (diameter < 50 nm) appear to be sensitive to small changes in heat release rates, so these particulate trends suggest surface conditioning that produces changes in heat release patterns. Heat release profiles showed an intriguing shift during one 175 minute period of stable aluminum piston operation. The 30 and 40% burn angles advanced while 5 and 60% burn angles remained unchanged. This shift in heat release was associated with reductions in NOx and exhaust temperature along with a 40-50 K decrease in calculated peak in-cylinder temperature.Keywords
This publication has 16 references indexed in Scilit:
- Influence of a Fuel Additive on the Performance and Emissions of a Medium-Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1994
- Diesel Additive Technology Effects on Injector Hole Erosion/Corrosion, Injector Fouling and Particulate TrapsSAE International Journal of Advances and Current Practices in Mobility, 1993
- The Influence of Automotive Diesel Back End Volatility and New Fuel Additive Technology on Regulated EmissionsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 1993
- Use of Dispersants/Detergents in Diesel Injector Keep Clean and Clean Up StudiesSAE International Journal of Advances and Current Practices in Mobility, 1991
- Diesel Particulate Emission Control without Engine Modifications-A Cost-Effective Fuel SupplementSAE International Journal of Advances and Current Practices in Mobility, 1989
- Catalytic Effects of Metallic Fuel Additives on Oxidation Characteristics of Trapped Diesel SootSAE International Journal of Advances and Current Practices in Mobility, 1988
- The effects of ferrocene addition on soot particle inception and growth in premixed ethylene flamesCombustion and Flame, 1987
- Characteristics of Diesel Soot Suppression with Soluble Fuel AdditivesSAE International Journal of Advances and Current Practices in Mobility, 1987
- Heterogeneous Catalysis in the Diesel Combustion ChamberCombustion Science and Technology, 1982
- Soot Reduction in Diesel Engines: A Chemical ApproachCombustion Science and Technology, 1980