Numerical Study of Heat Transfer and Speed Air Flow on Performance of an Auto-Ventilated Disc Brake
Open Access
Abstract
In the braking system, the heat dissipation generated by the friction between the disc and pad should be evacuated as quickly as possible. In this work, five common different automotive disc brakes were studied through mathematical theories of heat transfer and numerical methods using the ANSYS software. In addition, a direct comparison between experimental, theoretical, and simulation values found in the open literature was performed to propose a disc brake with an improved geometry in terms of dissipation of heat transfer. The numerical results were considered to propose two possible solutions of disc brake geometries using N-38 ventilation blades used in aeronautic engineering. An improvement in temperature dissipation was achieved by approximately 23.8% compared to the five geometries analyzed with a simple type N-38 ventilation blade. The heat dissipation in the brakes strongly depends on the geometry of the disc, the geometry of the blades, the material from which it is manufactured, the material of the pad, the weight of the vehicle, and the operating conditions, as can be verified with mathematical calculations and experiments. The results obtained demonstrate that the discs can be used effectively in extreme working conditions (80 km/h and 33°C), without affecting the safety of the occupants and the braking system.Keywords
This publication has 33 references indexed in Scilit:
- Investigation of temperature and thermal stress in ventilated disc brake based on 3D thermomechanical coupling modelAin Shams Engineering Journal, 2013
- Heat Transfer Enhancement in Ventilated Brake Disk Using Double Airfoil VanesJournal of Thermal Science and Engineering Applications, 2011
- Influence of convective cooling on a disc brake temperature distribution during repetitive brakingApplied Thermal Engineering, 2011
- Finite Element Analysis of Heat Partition in a Pad/Disc Brake SystemNumerical Heat Transfer, Part A: Applications, 2011
- Mathematical Modeling of Heat Conduction in a Disk Brake System During BrakingAsian Journal of Applied Sciences, 2011
- Development of asbestos-free friction lining material from palm kernel shellJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2008
- Experimental heat transfer and flow analysis of a vented brake rotorInternational Journal of Thermal Sciences, 2008
- An investigation of local heat transfer characteristics in a ventilated disc brake with helically fluted surfacesJournal of Mechanical Science and Technology, 2007
- Analysis of automotive disc brake cooling characteristicsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2003
- AIR FLOW AND HEAT TRANSFER IN VENTILATED DISC BRAKE ROTORS WITH DIAMOND AND TEAR-DROP PILLARSNumerical Heat Transfer, Part A: Applications, 2002