Fracture toughness of weldlines in thermoplastic injection molding
Authors:
- 1 August 1993
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 33 (15) , 996-1001
Abstract
Weldlines are fatal defects in many injection moldings of thermosetting resins and thermoplastics. Significant strength reduction by weldlines in thermoplastics is caused by poor adhesion, molecular orientation, and a V‐notch effect. These factors have been little investigated in detail, in spite of being well known. In the present article, the V‐notch effect on strength is discussed for two types of thermoplastics, polystyrene and polycarbonate. The depth of weldlines was obtained by milling on the weldline surface, and the fracture toughness was measured with a double edge notched specimen. Polystryrene, which was drastically weakened by weldlines, had relatively deeper V‐notch regions and the fracture toughness was also reduced by weldlines. Although polycarbonate had the same fracture toughness as polystyrene, it had strong weldlines since the depth of weldlines was negligibly small.Keywords
This publication has 9 references indexed in Scilit:
- The V‐notch at weld lines in polystyrene injection moldingsPolymer Engineering & Science, 1990
- Improvement of Weld Line Strength in Injection Molded FRTP ArticlesInternational Polymer Processing, 1988
- Performance prediction of weldline structure in amorphous polymersPolymer Engineering & Science, 1986
- The influence of knit‐lines on the tensile properties of injection molded partsPolymer Engineering & Science, 1983
- Weld line structures and properties in injection molded polypropylenePolymer Engineering & Science, 1981
- The effects of processing parameters on the tensile properties of weld lines in injection molded thermoplasticsPolymer Engineering & Science, 1981
- Some observations on the morphology and fracture characteristics of knit linesPolymer Engineering & Science, 1974
- Fatigue and Creep Rupture of an Acetal CopolymerJournal of Mechanical Engineering Science, 1974
- Fracture phenomena in polystyreneInternational Journal of Fracture, 1973