Cathode–Electrolyte Interface Modification by Binder Engineering for High‐Performance Aqueous Zinc‐Ion Batteries
Open Access
- 16 December 2022
- journal article
- research article
- Published by Wiley in Advanced Science
- Vol. 10 (5)
Abstract
A stable cathode–electrolyte interface (CEI) is crucial for aqueous zinc‐ion batteries (AZIBs), but it is less investigated. Commercial binder poly(vinylidene fluoride) (PVDF) is widely used without scrutinizing its suitability and cathode‐electrolyte interface (CEI) in AZIBs. A water‐soluble binder is developed that facilitated the in situ formation of a CEI protecting layer tuning the interfacial morphology. By combining a polysaccharide sodium alginate (SA) with a hydrophobic polytetrafluoroethylene (PTFE), the surface morphology, and charge storage kinetics can be confined from diffusion‐dominated to capacitance‐controlled processes. The underpinning mechanism investigates experimentally in both kinetic and thermodynamic perspectives demonstrate that the COO− from SA acts as an anionic polyelectrolyte facilitating the adsorption of Zn2+; meanwhile fluoride atoms on PTFE backbone provide hydrophobicity to break desolvation penalty. The hybrid binder is beneficial in providing a higher areal flux of Zn2+ at the CEI, where the Zn‐Birnessite MnO2 battery with the hybrid binder exhibits an average specific capacity 45.6% higher than that with conventional PVDF binders; moreover, a reduced interface activation energy attained fosters a superior rate capability and a capacity retention of 99.1% in 1000 cycles. The hybrid binder also reduces the cost compared to the PVDF/NMP, which is a universal strategy to modify interface morphology.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/L015862/1, EP/533581/1, EP/V027433/1)
- Faraday Institution (EP/S003053/1)
This publication has 53 references indexed in Scilit:
- “Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistriesScience, 2015
- Cost modeling of lithium‐ion battery cells for automotive applicationsEnergy Science & Engineering, 2014
- A theoretical model of transient cyclic voltammetry for electroactive biofilmsEnergy & Environmental Science, 2013
- Controlled synthesis of nanostructured manganese oxide: crystalline evolution and catalytic activitiesCrystEngComm, 2013
- CMC as a binder in LiNi0.4Mn1.6O4 5V cathodes and their electrochemical performance for Li-ion batteriesElectrochimica Acta, 2012
- A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion BatteriesScience, 2011
- Cross-linking mechanisms of calcium and zinc in production of alginate microspheresInternational Journal of Pharmaceutics, 2002
- Study of poly(acrylonitrile-methyl methacrylate) as binder for graphite anode and LiMn2O4 cathode of Li-ion batteriesJournal of Power Sources, 2002
- Influence of carbon black and binder on Li-ion batteriesJournal of Power Sources, 2001
- Infrared Spectra of High Polymers. III. Polytetrafluoroethylene and PolychlorotrifluoroethyleneThe Journal of Chemical Physics, 1956