Residual performance and damage mechanism of prestressed concrete box girder bridge subjected to falling heavy object impact
Authors:
- 7 February 2022
- journal article
- research article
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 19 (11) , 1568-1584
Abstract
Extreme vertical impact loading from dropped heavy cargo or falling rocks threatens the safety of bridge structures. The impact behavior and post-impact performance of a multi-piece prestressed concrete (PC) box girder bridge were investigated through numerical simulation. The moment-curvature analysis was performed to explain the damage mechanism and to predict the residual capacity of the girder under impact. The results demonstrate that the impacted girder suffers the most severe flexural failure whereas the other un-impacted girders exhibit flexural-torsional combined damage type. The impacted girder suffers from flexural failure to shear failure if the impact position on the girder transfers from mid-span to support. The increased impact energy deteriorates the damage of impacted girder while has little influence on the un-impacted girder. When the impact area decreases due to the varying impact angle, the displacement and impact force of the impacted girder reduce whereas local damage becomes more severe. The residual stiffness and resistance decrease significantly as the impact energy raises. It is concluded that severe concrete damage of top plate diminishes the flexural capacity of impacted girder.Keywords
Funding Information
- Natural Science Foundation of China (51808048)
- Project of Natural Science Basic Research of Shaanxi Province (2018JQ5093)
- the Central Universities, Chang’an University (300102219218)
This publication has 32 references indexed in Scilit:
- Numerical simulation of reinforced concrete beams with different shear reinforcements under dynamic impact loadsInternational Journal of Impact Engineering, 2011
- Numerical simulation of axially loaded concrete columns under transverse impact and vulnerability assessmentInternational Journal of Impact Engineering, 2010
- Structural response of RC wide beams under low-rate and impact loadingMagazine of Concrete Research, 2010
- A simplified approach for assessing the load-carrying capacity of reinforced concrete beams under concentrated load applied at high ratesInternational Journal of Impact Engineering, 2010
- Performance based design of reinforced concrete beams under impactNatural Hazards and Earth System Sciences, 2010
- Elasto-plastic impact response analysis of shear-failure-type RC beams with shear rebarsMaterials & Design (1980-2015), 2009
- Reinforced concrete members under drop-weight impactsProceedings of the Institution of Civil Engineers - Structures and Buildings, 2009
- Behavior of RC Beams Subjected to High Rates of Concentrated LoadingJournal of Structural Engineering, 2008
- Nonlinear Analysis for Reactive Powder Concrete Beams under Rapid Flexural LoadingsJournal of Advanced Concrete Technology, 2006
- Impact behavior of shear-failure-type RC beams without shear rebarInternational Journal of Impact Engineering, 2002