Hybrid Solder Joints: Viscosity Studies of the Nanocomposite Flux with Fe Nanoparticle Additions
Open Access
Abstract
Viscosity is one of the most important physical characteristics of choosing a flux for solder paste. However, not in all cases do the producers give information about the viscosity of commercial flux. A recent promising trend is to mix various kinds of nanoparticles with solder paste or flux and investigate the produced solder joints. However, the impact of nanosized inclusions on the viscosity of the flux has practically not been investigated. In this study, the temperature and shear rate dependencies of the viscosity of the nanocomposite flux were measured. For this purpose, the commercial flux has been mixed with Fe nanoparticles up to 2.0 wt.% of inclusions. It has been shown that viscosity increases with the addition of Fe nanoparticles. However, it is valid only for first heating up to circa 340 K. The viscosity values of the flux with and without nanosized inclusions are practically similar by further heating to 360 K as well as by subsequent cooling. Additionally, the performed differential thermal analysis has shown the heat effects, which are in good agreement with viscosity behavior.Keywords
Funding Information
- Austrian Science Fund (P 34894)
- TU Wien (P 34894)
This publication has 12 references indexed in Scilit:
- Iron Nanoparticle-Doped Flux: Wetting Characteristics of Flux and SAC305 Solder and Effects on Flux Viscosity2024
- Hybrid Solder Joints: Morphology and Mechanical Properties of lead-free Sn-based Solders with nano-sized Fe doped Flux2023
- The influence of particle size on the viscosity of water based ZnO nanofluidAlexandria Engineering Journal, 2023
- A review of nanomaterials as viscosity reducer for heavy oilJournal of Dispersion Science and Technology, 2020
- Hybrid solder joints: morphology and shear strength of Sn–3.0Ag–0.5Cu solder joints by adding ceramic nanoparticles through flux dopingApplied Nanoscience, 2020
- Thermal Stability of Abietic Acid and Its Oxidation ProductsEnergy & Fuels, 2019
- Dynamic viscosity of a liquid Sn-3.0Ag-0.5Cu alloy with Ni nanoparticlesJournal of Molecular Liquids, 2018
- Experimental and Theoretical Study of Viscosity Reduction in Heavy Crude Oils by Addition of NanoparticlesEnergy & Fuels, 2017
- Thermal oxidation reaction process and oxidation kinetics of abietic acidRSC Advances, 2015
- Structure and properties of lead-free solders bearing micro and nano particlesMaterials Science and Engineering: R: Reports, 2014