On the martensitic phase transformation and grain boundary character evolution in laser powder bed fusion 17-4 precipitation hardened stainless steel
Authors:
Open Access
- 28 January 2025
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (7) , 3430-3453
Abstract
Laser powder bed fusion (L-PBF) of 17-4 precipitate hardened (PH) stainless steel is well-known for its significant variations in reported microstructures. While recent research has provided better understanding of the phase transformation pathways leading to as-built microstructures of $$\delta$$ -ferrite, martensite, and/or austenite, reproducible and fully martensitic microstructures would be more desirable to provide strength and age-hardening potential. However, the understanding of the martensitic phase transformation as a function of 17-4 PH powder feedstock and L-PBF route remains limited. We aim to fill this gap by comparing builds from two processing routes with different powder feedstocks and processing parameters. As-built and heat treated (1 h at 1040 °C followed by water quenching) conditions are considered. We reveal the link between the parent austenite grain size (PAGS) and the resulting martensite microstructure. A detailed five-parameter characterization of interfaces shows that a smaller PAGS results in improved grain boundary connectivity and higher length fractions of 60°/[1 1 $$\overline{1 }$$ ] and 10.5°/[0 1 1] intervariant boundaries in the martensite. Computational material science demonstrates the link between the processing parameters and composition with microstructural variations and development. Our results are broadly applicable to steel L-PBF, underpinning that refinement of martensite will improve the grain boundary network and selection of desirable intervariants. This is expected to impact material properties such as toughness, strength, intergranular corrosion, cracking, slip, and the segregation of impurities. Graphical abstract
Keywords
Funding Information
- Defence Science and Technology Group (AUSMURI000005)
- Australian Research Council (DP230101063)
- University of New South Wales
This publication has 88 references indexed in Scilit:
- Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ CharacterizationsMetallurgical and Materials Transactions A, 2018
- Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5Metallurgical and Materials Transactions A, 2018
- Austenite Reconstruction Elucidates Prior Grain Size Dependence of Toughness in a Low Alloy SteelMetallurgical and Materials Transactions A, 2018
- The Role of Thermomechanical Routes on the Distribution of Grain Boundary and Interface Plane Orientations in Transformed MicrostructuresMetallurgical and Materials Transactions A, 2016
- Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible MicrostructureJOM, 2015
- The Distribution of Grain Boundary Planes in Interstitial Free SteelMetallurgical and Materials Transactions A, 2012
- A Toolbox for Geometric Grain Boundary Characterization2012
- Alloy Shrinkage Factors for the Investment Casting of 17-4PH Stainless Steel PartsMetallurgical and Materials Transactions B, 2008
- Influence of alloying elements on the kinetics of strain-induced martensitic nucleation in low-alloy, multiphase high-strength steelsMetallurgical and Materials Transactions A, 2006
- Der Mechanismus der Stahlh rtungThe Science of Nature, 1930