Assessment of Woodcrete Using Destructive and Non-Destructive Test Methods
Open Access
Abstract
Utilizing solid wastes and industrial by-products as a partial replacement for raw materials has become an acceptable practice among researchers and scientists in the civil engineering field. Sawdust and wood shavings are not an exception; they are being used in concrete as a partial or total replacement for some of its constituents. The main goal of this research is to establish a relation between destructive and non-destructive testing for concrete containing wood shavings as a partial replacement of sand (woodcrete). With this type of material existing, thus the need to understand the behavior of such material becomes urgent and evokes the need to ease the process of the assessment and the evaluation of such materials and therefore provide more understanding of its behavior. In addition to the conventional concrete mix, five mixes of woodcrete were made by replacing fine aggregate by volume with wood shavings at different replacement levels varied from 5% to 50%. Cubic samples were tested at the age of 90 days using nondestructive tests (NDT), namely, rebound hammer test and ultrasonic pulse velocity test. Then, the specimens were tested using a conventional compressive test using a universal compression testing machine. Statistical analysis was performed to establish empirical relations between destructive and non-destructive results. The dynamic modulus of elasticity was calculated, and some formulas to estimate the (compressive) strength of woodcrete using NDT results were proposed and tested against experimental results and showed acceptable results.Keywords
This publication has 41 references indexed in Scilit:
- Utilization of wood ash in concrete manufacturingResources, Conservation and Recycling, 2012
- Design of a low-density wood–cement particleboard for interior wall finishCement and Concrete Composites, 2012
- Scrap-tyre-rubber replacement for aggregate and filler in concreteConstruction and Building Materials, 2009
- Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretesConstruction and Building Materials, 2009
- Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networksUltrasonics, 2009
- Strength properties of concrete incorporating coal bottom ash and granulated blast furnace slagWaste Management, 2007
- Potential of Wood Waste Ash as an Additive in ConcreteJournal of Materials in Civil Engineering, 2006
- Cement-bonded wood particleboard with a mixture of eucalypt and rubberwoodCement and Concrete Composites, 2004
- Contribution of indoor exposed massive wood to a good indoor climate: in situ measurement campaignEnergy and Buildings, 2004
- Elastic crack growth in finite elements with minimal remeshingInternational Journal for Numerical Methods in Engineering, 1999