Fatigue Strength Assessment of Friction Welds under Consideration of Residual Stress
Open Access
Abstract
A reliable local-fatigue assessment approach for rotary friction-welded components does not yet exist. The scope of this paper is to present test results for the fatigue behaviour of rotary friction-welded solid shafts made of structural steel S355J2G3 (1.0570) and an approach to fatigue assessment considering residual stress. In contrast to fusion-welded joints, components made by rotary friction welding usually contain compressive residual stress near the weld, which can significantly affect the fatigue strength. For this purpose, specimens were welded and characterised, including metallographic micrographs, hardness measurements, and residual stress measurements. The fatigue tests were performed with a constant amplitude loading in tension/compression or torsion with R = −1. All specimens were investigated without machining of the weld flash, either in the as-welded state or after a post-weld stress-relief heat treatment. In addition, the friction welding process and the residual stress formation were analysed using numerical simulation. The characterisation results are integrated into a fatigue assessment approach. Overall, the specimens perform comparatively well in the fatigue tests and the experimentally observed fatigue behaviour is well described using the proposed local approaches.Keywords
Funding Information
- Federal Ministry for Economic Affairs and Energy (20.357 N)
This publication has 25 references indexed in Scilit:
- A statistical assessment of the fatigue strength improvement of butt-welded joints by flush grindingWelding in the World, 2023
- Comparison of local fatigue assessment methods for high-quality butt-welded joints made of high-strength steelForces in Mechanics, 2022
- Erratum to: Recommendations for Fatigue Design of Welded Joints and Components2019
- Influence of three-dimensional weld undercut geometry on fatigue-effective stressWelding in the World, 2018
- Evaluating location specific strain rates, temperatures, and accumulated strains in friction welds through microstructure modelingDefence Technology, 2018
- Fatigue assessment of welded joints using stress averaging and critical distance approachesWelding in the World, 2015
- S-N Lines for Welded Thin Joints — Suggested Slopes and FAT Values for Applying the Notch Stress Concept with Various Reference RadiiWelding in the World, 2010
- Verification of FAT Values for the Application of the Notch Stress Concept with the Reference Radii Rref = 1.00 and 0.05 mmWelding in the World, 2010
- Light‐weight design chances using high‐strength steelsMaterialwissenschaft und Werkstofftechnik, 2007
- Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction weldingJournal of Materials Science, 2006