Modeling Warp in Corrugated Cardboard Based on Homogenization Techniques for In-Process Measurement Applications
Open Access
- 6 February 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1684
Abstract
A model for describing warp—characterized as a systematic, large-scale deviation from the intended flat shape—in corrugated board based on Kirchhoff plate theory is proposed. It is based on established homogenization techniques and only a minimum of model assumptions. This yields general results applicable to any kind of corrugated cardboard. Since the model is intended to be used with industrial data, basic material properties which are usually not measured in practice are summarized to a few parameters. Those parameters can easily be fitted to the measurement data, allowing the user to systematically identify ways to reduce warp in a given situation in practice. In particular, the model can be used both as a filter to separate the warp from other surface effects such as washboarding, and to interpolate between discrete sample points scattered across the surface of a corrugated board sheet. Applying the model only requires height measurements of the corrugated board at several known (not necessarily exactly predetermined) locations across the corrugated board and acts as an interpolation or regression method between those points. These data can be acquired during production in a cost-efficient way and do not require any destructive testing of the board. The principle of an algorithm for fitting measured data to the model is presented and illustrated with examples taken from ongoing measurements. Additionally, the case of warp-free board is analyzed in more detail to deduce additional theoretical conditions necessary to reach this state.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie (ZF4152307PO8)
This publication has 24 references indexed in Scilit:
- Estimation of the Compressive Strength of Corrugated Cardboard Boxes with Various OpeningsEnergies, 2020
- Torsional and Transversal Stiffness of Orthotropic Sandwich PanelsMaterials, 2020
- Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3)Frontiers of Structural and Civil Engineering, 2018
- An equivalent plate model for corrugated-core sandwich panelsJournal of Mechanical Science and Technology, 2015
- An equivalent classical plate model of corrugated structuresInternational Journal of Solids and Structures, 2014
- Corrugated Box Compression—A Literature SurveyPackaging Technology and Science, 2013
- Equivalent models of corrugated panelsInternational Journal of Solids and Structures, 2012
- A model research for prototype warp deformation in the FDM processThe International Journal of Advanced Manufacturing Technology, 2006
- Numerical and experimental investigation of the strength of corrugated board packagesPackaging Technology and Science, 2003
- The Elastic Constants of Corrugated Board PanelsJournal of Composite Materials, 2001