Anchorages Effects on CFRP-to-concrete Bond Strength
Authors:
- 30 January 2009
- journal article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 29 (4) , 539-557
Abstract
In this study, the effect of the number of applied anchorages, arrangement, and types of anchorage on stress distribution between the CFRP strip and the concrete surface were studied. Two different anchoraging arrangements with two types of anchorage and three different numbers of anchorages are tested on 12 test specimens by keeping the concrete compressive strength and the CFRP strip bond length constant. In addition, two test specimens without any anchorages, totalling 14 specimens, were tested. It is observed that the anchorages had an impact on the stress distribution of the CFRP strips and increased the strength and the stiffness of the specimens. The specimens did not fail by peeling of the CFRP strips, instead they were ruptured at the point where the anchorages were situated.Keywords
This publication has 19 references indexed in Scilit:
- Strength of carbon fiber reinforced polymers bonded to concrete and masonryConstruction and Building Materials, 2007
- Experimental study on FRP-to-concrete bonded jointsComposites Part B: Engineering, 2005
- Intermediate crack-induced debonding in RC beams and slabsConstruction and Building Materials, 2003
- A structural engineering approach to adhesive bonding longitudinal plates to RC beams and slabsComposites Part A: Applied Science and Manufacturing, 2003
- Shear-Bending Interaction in Debonding Failures of FRP-Plated RC BeamsAdvances in Structural Engineering, 2003
- Interaction between Flexure and Shear on the Debonding of RC Beams Retrofitted with Compression Face PlatesAdvances in Structural Engineering, 2002
- Horsetail Creek Bridge: Design Method Calibration and Experimental Results of Structural Strengthening with CFRP and GFRP LaminatesAdvances in Structural Engineering, 2002
- Behaviour of GFRP-strengthened RC cantilever slabsConstruction and Building Materials, 2001
- Defining anchor lengths of steel and CFRP plates bonded to concreteInternational Journal of Adhesion and Adhesives, 1997
- Force transfer in epoxy bonded steel/concrete jointsInternational Journal of Adhesion and Adhesives, 1980