Changes on transmittance mode of different composite resins
Open Access
- 1 June 2009
- journal article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 12 (2) , 127-132
Abstract
The purpose of this study was to evaluate the transmittance of seven different composite resins. Ten specimens were prepared (10 mm diameter, 2 mm thickness) for each experimental group, as follows: G1- Charisma® A 2 (Heraeus-Kulzer); G2- Filtek™ Supreme A 2E (3M/ESPE); G3- Filtek™ Supreme A2B (3M/ESPE); G4-Filtek™ Supreme YT (3M/ESPE); G5- Esthet-X® A2 (Dentsply); G6- Esthet-X® YE (Dentsply); G7- Durafill® A 2 (Heraeus-Kulzer) and G8- Filtek™ Z-100 A2 (3M/ESPE). The transmittance mode was measured using a UV-visible spectrophotometer (Cary Instruments) at 400-760 nm. The specimens were evaluated at three different times: zero hour (initial), 24 hours and 10 days after immersion in artificial saliva. The differences in transmittance were determined by two-way analysis of variance (ANOVA) and Tukey's test. The various composite resins showed significant differences in the wavelength dependence of transmittance. The mean values of transmittance increased significantly, with wavelengths increasing from 400 to 760 nm. The performance of the experimental groups was similar in terms of immersion time, considering that at time zero and after 10 days, all the groups showed similar results, which were statistically higher than the values obtained after 24 hours of immersion. The Filtek™ Supreme YT composite resin presented the highest mean transmittance values along the wavelengths at the three measured times. Esthet-X® YE and Durafill® yielded similar mean transmittance values, which were higher than those of the other groups. This study shows that the transmittance values of composite resins are directly related with the type, size and amount of inorganic filler particlesKeywords
This publication has 22 references indexed in Scilit:
- Influence of filler on the difference between the transmitted and reflected colors of experimental resin compositesDental Materials, 2008
- Light transmission on dental resin compositesDental Materials, 2008
- Effect of Filler Properties in Composite Resins on Light Transmittance Characteristics and ColorDental Materials Journal, 2007
- Stain potential of four microfilled compositesThe Journal of Prosthetic Dentistry, 1988
- Techniques for achieving realistic color distribution in large composite resin restorationsThe Journal of the American Dental Association, 1986
- Optical properties of composite resinsJournal of Oral Rehabilitation, 1982
- Translucency of Dental PorcelainsJournal of Dental Research, 1980
- Parameters that Affect the Color of Direct Restorative ResinsJournal of Dental Research, 1978
- Properties of a silica-reinforced polymer for dental restorationsThe Journal of the American Dental Association, 1963
- A Simple Method of Increasing the Adhesion of Acrylic Filling Materials to Enamel SurfacesJournal of Dental Research, 1955