Effect of Different Surface Treatments on the Properties of Jute
- 3 March 2016
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 13 (2) , 158-171
Abstract
In this study, effect of various surface treatment processes on waste jute fibers, which can be used for composite material production, was considered. For this purpose, jutes (J) were treated with NaOH as a pretreatment process before the other surface treatments. Then, alkali treated jutes (AJ) were modified with silane coupling agent (ASJ), fluorocarbon-based agent (AFJ), and also argon plasma (APJ). To investigate effects of the treatments on surface characteristics and physical properties of jutes; Fourier transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy, thermogravimetric analysis, x-ray diffraction, and scanning electron microscopy (SEM) were used. The effects of treatments were also revealed by determination of moisture content and density of the jute particles. It is determined that alkali treatment increase hydrophilicity of jute particles with providing reactive hydroxyl groups by partially removal of surface impurities as supported by FTIR analysis. This surface cleaning is also confirmed by SEM which shows surface fibrillation of AJ particles. The crystallinity index of the jute particles increased with the surface treatments by improving the crystallite packing order. Thermal stability of the jute particles changed after all of the surface treatments. According to the findings obtained from surface characterizations and physical tests, the most hydrophobic surface was achieved after fluorocarbon treatment (with alkali pretreatment) by providing the highest C/O ratio on the surface of the jute particles and reduced moisture content, which can be benefits in short fiber or particulate reinforced composite manufacturing by preventing agglomeration of fillers.Keywords
This publication has 32 references indexed in Scilit:
- Extraction and properties of Ferula communis (chakshir) fibers as novel reinforcement for composites materialsComposites Part B: Engineering, 2013
- Surface treatments of jute fabric: The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester compositesIndustrial Crops and Products, 2012
- Effect of the atmospheric plasma treatment parameters on jute fabric: The effect on mechanical properties of jute fabric/polyester compositesJournal of Applied Polymer Science, 2011
- Plasma Treatment of Natural Jute Fibre by RIE 80 plus Plasma ToolPlasma Science and Technology, 2010
- Investigation on Physio-chemical and Mechanical Properties of Raw and Alkali-treated Agave americana FiberJournal of Reinforced Plastics and Composites, 2010
- Effect of Plasma Treatment on Structure, Wettability of Jute Fiber and Flexural Strength of its CompositeJournal of Composite Materials, 2009
- Chemical modification of hemp, sisal, jute, and kapok fibers by alkalizationJournal of Applied Polymer Science, 2002
- Characterization of alkali‐treated jute fibers for physical and mechanical propertiesJournal of Applied Polymer Science, 2001
- Measurement of density of fibers of jute by density gradient columnJournal of Polymer Science, 1961
- An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray DiffractometerTextile Research Journal, 1959