Fatigue strength assessment of ship structures accounting for a coating life and corrosion degradation
- 4 March 2016
- journal article
- research article
- Published by Emerald Publishing in International Journal of Structural Integrity
- Vol. 7 (2)
Abstract
Purpose: Fatigue strength and reliability assessment of complex double hull oil tanker structures, based on different local structural finite element approaches, is performed accounting for the uncertainties originating from load, nominal stresses, hot spot stress calculations, weld quality estimations and misalignments and fatigue S-N parameters including the correlation between load cases and the coating life and corrosion degradation.Design/methodology/approach: Ship hull wave-induced vertical and horizontal bending moments and pressure are considered in the analysis. Stress analyses are performed based on the nominal, local hot spot and notch stress approaches. A linear elastic finite element analysis is used to determine the stress distribution around the welded details and to estimate structural stresses of all critical locations. Fatigue damage is estimated by employing the Palmgren-Miner approach. The importance of the contribution of each random variable to the uncertainty of the fatigue limit state function is also estimated. The probability of fatigue damage of hot spots is evaluated taking into account random coating life and corrosion wastage. Fatigue reliability, during the service life, is modelled as a system of correlated events.Findings: The fatigue analysis showed that the fatigue damage at the hotspot, located at the flange of the stiffener close to the cut-out, is always highest in the cases of the structural hot spot stress and effective notch stress approaches, except for the one of the nominal stress approach. The sensitivities of the fatigue limit state function with respect to changes in the random variables were demonstrated showing that the uncertainty in the fatigue stress estimation and fatigue damage are the most important. Fatigue reliability, modelled as a parallel system of structural hot spots and as a serial system of correlated events (load cases) was evaluated based on the Ditlevsen bounds. As a result of the performed analysis, reliability and Beta reliability indexes of lower and upper bounds were estimated, which are very similar to the ones adopted for ultimate strength collapse as reported in literature.Originality/value: This paper develops a very complex fatigue strength and reliability assessment model for analysing a double hull oil tanker structure using different local structural finite element approaches accounting for the associated uncertainties and the correlation between load cases and the coating life and corrosion degradation. The developed model is flexible enough to be applied for analysing different structural failure modes.Keywords
This publication has 16 references indexed in Scilit:
- Spectral fatigue damage assessment of tanker deck structural detail subjected to time-dependent corrosionInternational Journal of Fatigue, 2013
- Fatigue damage assessment of corroded oil tanker details based on global and local stress approachesInternational Journal of Fatigue, 2012
- Structural maintenance planning based on historical data of corroded deck plates of tankersReliability Engineering & System Safety, 2009
- Round robin study on structural hot-spot and effective notch stress analysisShips and Offshore Structures, 2008
- Fatigue analysis of ship deck structure accounting for imperfectionsInternational Journal of Fatigue, 2008
- Cost and reliability based strategies for fatigue maintenance planning of floating structuresReliability Engineering & System Safety, 2001
- Fatigue Reliability of Maintained Welded Joints in the Side Shell of TankersJournal of Offshore Mechanics and Arctic Engineering, 1998
- Fatigue strength assessment of scallops —an example for the application of nominal and local stress approachesMarine Structures, 1995
- Representation of double-peaked sea wave spectraOcean Engineering, 1984
- Narrow Reliability Bounds for Structural SystemsJournal of Structural Mechanics, 1979