Influence of clogging on the hydrologic performance of a double layer porous asphalt
Open Access
- 9 August 2018
- journal article
- research article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 21 (6) , 736-745
Abstract
Nowadays, the increasing urbanisation and the effect of climate change in cities has been a constant concern. In particular, the floods cause a significant increase in surface runoff, mostly on roads and parking areas. As an alternative to asphalt pavements, usually used in these areas, permeable pavements have been developed with Porous Asphalt (PA). These pavements allow the infiltration of water from the surface to the ground due to the high void content of the PA, thus reducing the surface runoff and increasing recharge of groundwater. Over the years, the infiltration capacity of the mixtures decreases with the clogging by sediments from the vehicles themselves and/or from the local environment. In order to mitigate this effect, a Double Layer Porous Asphalt (DLPA) was developed. This research intends to deepen the knowledge about the influence of the clogging of a DLPA, with respect to the infiltration capacity, since it is an essential theme in the pavements lifespan and that needs to be developed. This study considered different evaluation phases of the infiltration capacity with two clogging cycles (500 and 1000 g/m2). The materials used were: sand, region soil, and rubber waste. The infiltration capacity test was performed in different phases after a rainfall event of 100 mm/h with a rainfall simulator developed for this purpose. Furthermore, the permeability test with the falling head permeameter was carried out in parallel, obtaining outflow times for each clogging phase and subsequent maintenance phase. The research concluded that DLPA has a high infiltration capacity after the first clogging cycle in both performed tests. In the second clogging cycle, the results show that the infiltration decreased due to the partial filling of the pores, mainly, for the rubber-filled DLPA. The type of clogging material influences the infiltration capacity, nevertheless partially recovered after simple maintenance was performed.Keywords
Funding Information
- Foundation for Science and Technology (UID/ECI/04082/2013)
This publication has 27 references indexed in Scilit:
- Clogging evaluation of open graded friction course pavements tested under rainfall and heavy vehicle simulatorsJournal of Environmental Management, 2013
- Long-Term Hydraulic Performance of Porous Asphalt Pavements in Northern SwedenJournal of Irrigation and Drainage Engineering, 2013
- Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphaltRoad Materials and Pavement Design, 2012
- Filtration and clogging of permeable pavement loaded by urban drainageWater Research, 2012
- Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lotsJournal of Environmental Management, 2012
- A comparison of two variable intensity rainfall simulators for runoff studiesSoil and Tillage Research, 2010
- Pollutant load removal efficiency of pervious pavements: is clogging an issue?Water Science & Technology, 2009
- Influence of clogging on the effective life of permeable pavementsProceedings of the Institution of Civil Engineers - Water Management, 2009
- Clogging of stormwater gravel infiltration systems and filters: Insights from a laboratory studyWater Research, 2007
- Draining function of porous asphalt during snowmelt and temporary freezingCanadian Journal of Civil Engineering, 2000