Shear Capacity of Cold-Formed Steel Channels with Edge-Stiffened Web Holes, Unstiffened Web Holes, and Plain Webs
- 1 February 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 148 (2) , 04021268
Abstract
In this paper, a total of 254 results comprising 30 shear tests and 224 finite element (FE) analysis results are reported. Simply supported test specimens of cold-formed steel (CFS) channels with aspect ratios of 1.0 and 1.5 were tested. For comparison, specimens with unstiffened web holes and plain webs were also tested. A nonlinear elastoplastic FE model was then developed and validated against the experimental results. Using the validated FE model, a parametric study was conducted to investigate the effect of various influential parameters on the shear capacity of such CFS channels. The test results show that for a channel with edge-stiffened web holes, the shear capacity increased by 14.5% on average when compared with that of a channel with unstiffened web holes. The test and FE results were compared against the design predictions. Upon comparison, it was found that the design rules of CFS channels with unstiffened web holes in accordance with the AISI and AS/NZS can be unconservative by 7% while calculating the shear capacity of CFS channels with edge-stiffened web holes. Therefore, a suitable design formula in the form of a shear capacity reduction factor was proposed for CFS channels with edge-stiffened web holes.Keywords
This publication has 24 references indexed in Scilit:
- Direct Strength Method of Design for Channel Sections in Shear with Square and Circular Web HolesJournal of Structural Engineering, 2017
- Effects of edge-stiffened circular holes on the web crippling strength of cold-formed steel channel sections under one-flange loading conditionsEngineering Structures, 2017
- Experimental investigation and design of lipped channel beams in shearThin-Walled Structures, 2015
- Improved shear design rules for lipped channel beams with web openingsJournal of Constructional Steel Research, 2014
- Experimental studies of the shear behaviour and strength of lipped channel beams with web openingsThin-Walled Structures, 2013
- Cold-formed steel flexural member with edge stiffened holes: Behavior, optimization, and designJournal of Constructional Steel Research, 2012
- Numerical simulation of high strength cold-formed purlins in combined bending and shearJournal of Constructional Steel Research, 2010
- Experimental Investigation of High Strength Cold-Formed C-Sections in Combined Bending and ShearJournal of Structural Engineering, 2010
- Shear buckling of thin-walled channel sectionsJournal of Constructional Steel Research, 2009
- Cold-formed steel webs with openings: Summary reportThin-Walled Structures, 1997