Atomization Performance of Spray Nozzles and Their Influence on Fine Particle Collection in the Wet Electrostatic Precipitator
Open Access
Abstract
The wet electrostatic precipitator (WESP) is crucial for the ultra-purification of blast furnace gas in gas-fired generator units. To address issues like high water consumption, poor atomization leading to spark discharge, and uneven water mist distribution, a water mist testing system using a laser particle-size analyzer was established. Eight spray nozzles were tested to identify the optimal atomization performance and operating parameters. The effect of chemical agglomeration agents on nozzle atomization and particle capture efficiency was also examined. The results show that the atomization effect was the best when the operating water pressure was 0.5 MPa. The D50 of the blast furnace dust increased from 8.529 μm to 20.30 μm after electrostatic precipitation when the 1/8 rotating core nozzles were installed in the WESP, and the proportion of dust particles whose diameter is ≤5 μm decreased by 20.09% compared with the dust emitted from the inlet. The total dust removal efficiency reached 83.41%. With chemical agglomeration, the D50 reached 24.88 μm, and removal efficiency rose to 96.98%. Among the tested nozzles, the 1/8 rotating core nozzle was the most effective, combining superior atomization, maximum dust removal efficiency, and minimal water consumption, making it ideal for blast furnace gas purification.Keywords
Funding Information
- Natural Science Foundation of Hebei Province, China (E2015203236, 202003B033)
- Qinhuangdao Science and Technology Research and Development Program (E2015203236, 202003B033)
This publication has 32 references indexed in Scilit:
- Study of spray atomization law and dust suppression effect of a wet dust catcher on a hydraulic supportEnergy, 2024
- Industrial application and numerical simulation on discrete dynamics of fine particulate matters: Condensational growth, deposition and agglomerationChemical Engineering Journal, 2024
- Design, optimization, and evaluation of a wet electrostatic precipitator (ESP) for aerosol collectionAtmospheric Environment, 2023
- Experimental research on atomization process and dust reduction performance of swirl pressure nozzleEnvironmental Science and Pollution Research, 2022
- Effect of working pressure and spacing of nozzles on the quality of spraying distributionCrop Protection, 2022
- Water film area and dust removal efficiency of string grilles: a theoretical analysisInternational Journal of Coal Science & Technology, 2021
- Investigation on the atomization characteristics of a solid-cone spray for dust reduction at low and medium pressuresAdvanced Powder Technology, 2019
- Collection and charging characteristics of particles in an electrostatic precipitator with a wet membrane collecting electrodeJournal of Electrostatics, 2016
- Near-limit drop deformation and secondary breakupInternational Journal of Multiphase Flow, 1992
- Stability of colliding drops of ideal liquidJournal of Applied Mechanics and Technical Physics, 1983