Active Slip Mode Analysis of an Additively Manufactured Ti-6Al-4V Alloy via In-Grain Misorientation Axis Distribution
Open Access
Abstract
Selective laser-melted (SLM) Ti-6Al-4V alloy was quasi-statically compressed in the transverse and longitudinal directions at a strain rate of 1 × 10−3 s−1 at room temperature. The twinning, in-grain misorientation axis (IGMA) distribution and active slip modes of individual grains in the deformed SLM Ti-6Al-4V alloy were studied in detail via transmission Kikuchi diffraction (TKD) and transmission electron microscopy (TEM). The α’/α phase was textured with the c-axis oriented either at ~45° or perpendicular to the building direction (BD). A combined analysis of the IGMA distribution and Schmid factor revealed that the prismatic slip or pyramidal slip was easily activated in the soft grains with their c-axes perpendicular to the BD (or the loading direction) in the longitudinal compressed sample, while slip was hardly activated in the transverse compressed sample due to the lack of soft grains. Prismatic slip with IGMA around Taylor axis also occurred in {10–11} twins. The observations revealed that the prismatic slip played a key role in accommodating the external strain and, thus, well explained the anisotropy of mechanical properties in the SLM Ti-6Al-4V alloy.Keywords
All Related Versions
This publication has 64 references indexed in Scilit:
- Crystallographic classification of kink bands in an extruded Mg–Zn–Y alloy using intragranular misorientation axis analysisActa Materialia, 2013
- Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth AlloysMetallurgical and Materials Transactions A, 2011
- Deformation heterogeneity of Ti under cryogenic channel-die compressionProgress in Natural Science: Materials International, 2011
- Investigation of Prism 〈a〉 Slip in Warm-Rolled AZ31 AlloyMetallurgical and Materials Transactions A, 2011
- Microstructural refinement and deformation mode of Ti under cryogenic channel die compressionMaterials Science and Engineering: A, 2010
- Distribution Characteristics of In-Grain Misorientation Axes in Cold-Rolled Commercially Pure Titanium and Their Correlation with Active Slip ModesMetallurgical and Materials Transactions A, 2010
- Crystal plasticity modeling of slip activity in Ti–6Al–4V under high cycle fatigue loadingInternational Journal of Plasticity, 2009
- Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scalesActa Materialia, 2008
- Deformation twins in pure titanium processed by equal channel angular pressingScripta Materialia, 2003
- Deformation mechanisms of Ti–6Al–4V alloy with a martensitic microstructure subjected to oligocyclic fatigueActa Materialia, 2000