EXTRACTION OF NICKEL FROM A MIXED NICKEL-COBALT HYDROXIDE PRECIPITATE
- 1 March 2019
- journal article
- Published by Bilimsel Madencilik Dergisi in Bilimsel Madencilik Dergisi
- Vol. 58 (1) , 45-52
Abstract
The extraction of nickel from a mixed nickel-cobalt hydroxide precipitate (MHP) was conceived and experimentally explored. The effect of sulphuric acid concentration, leaching time, leaching temperature and stirring speed on nickel extraction was investigated. After 60 min leaching time, more than 90% of nickel and approximately 80% of cobalt were taken into the leach solution under the following conditions: 0.75M sulphuric acid concentration, 30°C leaching temperature and 400 rpm stirring speed. pH of the leach slurry was determined as 1.23 under the conditions explored. It was observed that there is no beneficial effect of leaching temperature and stirring speed on the extraction of nickel from the MHP sample. The XRD pattern of the fresh MHP sample revealed the data and peak of the sample widening which is indicative of amorphous solid structure.Keywords
This publication has 7 references indexed in Scilit:
- The Starved Acid Leaching Technology (SALT) for Recovery of Nickel and Cobalt from Saprolites and Caron Plant Residues2013
- Selective precipitation of mixed nickel–cobalt hydroxideHydrometallurgy, 2011
- Atmospheric acid leaching of nickel laterites reviewHydrometallurgy, 2008
- Direct solvent extraction of nickel at Bulong operationsMinerals Engineering, 2006
- Leaching of low grade limonite and nontronite ores by fungi metabolic acidsMinerals Engineering, 2006
- Fungal bio-leaching of low grade laterite oresMinerals Engineering, 2001
- On the existence of a nickel hydroxide phase which is neither α nor βJournal of Materials Chemistry, 1997