Finite-Element Modeling of FRP-Confined Noncircular Concrete Columns Using the Evolutionary Potential-Surface Trace Plasticity Constitutive Model for Concrete
- 1 February 2023
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 27 (1) , 04022089
Abstract
The compressive behavior of fiber-reinforced polymer (FRP)-confined concrete columns with a noncircular cross section has been investigated through extensive experimental, analytical, and numerical research, but a unified theoretical/numerical approach that can accurately predict both their section-average behavior and local concrete behavior is not yet available. In noncircular columns under axial compression, the concrete is typically under a nonuniform stress state of three-dimensional (3D) compression, with the lateral compressive stresses being the reactive stresses from the confining device (i.e., passive confinement). The authors of the present paper recently developed a plasticity constitutive model for concrete under general 3D compressive stresses, which possesses a potential surface with an evolutionary deviatoric trace that can accurately capture the results of existing compression tests of concrete cubes under nonuniform, passive confinement. This paper explores the application and capability of this evolutionary potential-surface trace (EPT) plasticity constitutive model in finite-element (FE) analysis of FRP-confined square, rectangular, and elliptical plain-concrete columns under concentric compression. The section-average behavior of all the selected noncircular columns predicted by these FE analyses was close to the existing experimental data. The numerical results obtained with the EPT plasticity constitutive model were then examined in detail to achieve an improved understanding of local concrete behavior in FRP-confined noncircular columns.Keywords
This publication has 61 references indexed in Scilit:
- Effect of corner radius and aspect ratio on compressive behavior of rectangular concrete columns confined with CFRPMaterials and Structures, 2013
- Axial Compressive Behavior of Square and Rectangular High-Strength Concrete-Filled FRP TubesJournal of Composites for Construction, 2013
- Unified stress–strain model of concrete for FRP-confined columnsConstruction and Building Materials, 2012
- Nonlinear finite element modeling of rectangular/square concrete columns confined with FRPMaterials & Design (1980-2015), 2009
- FRP-confined concrete under axial cyclic compressionCement and Concrete Composites, 2006
- Design-oriented stress–strain model for FRP-confined concreteConstruction and Building Materials, 2003
- Concrete in compression: a plasticity theory with a novel hardening lawInternational Journal of Solids and Structures, 2002
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989
- A nonuniform hardening plasticity model for concrete materialsMechanics of Materials, 1985
- Conditions for the localization of deformation in pressure-sensitive dilatant materialsJournal of the Mechanics and Physics of Solids, 1975