Channel cracks in atomic-layer and molecular-layer deposited multilayer thin film coatings
Authors:
- 19 June 2014
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 115 (23) , 233514
Abstract
Metal oxide thin film coatings produced by atomic layer deposition have been shown to be an effective permeation barrier. The primary failure mode of such coatings under tensile loads is the propagation of channel cracks that penetrate vertically into the coating films. Recently, multi-layer structures that combine the metal oxide material with relatively soft polymeric layers produced by molecular layer deposition have been proposed to create composite thin films with desired properties, including potentially enhanced resistance to fracture. In this paper, we study the effects of layer geometry and material properties on the critical strain for channel crack propagation in the multi-layer composite films. Using finite element simulations and a thin-film fracture mechanics formalism, we show that if the fracture energy of the polymeric layer is lower than that of the metal oxide layer, the channel crack tends to penetrate through the entire composite film, and dividing the metal oxide and polymeric materials into thinner layers leads to a smaller critical strain. However, if the fracture energy of the polymeric material is high so that cracks only run through the metal oxide layers, more layers can result in a larger critical strain. For intermediate fracture energy of the polymer material, we developed a design map that identifies the optimal structure for given fracture energies and thicknesses of the metal oxide and polymeric layers. These results can facilitate the design of mechanically robust permeation barriers, an important component for the development of flexible electronics.Keywords
This publication has 19 references indexed in Scilit:
- Critical tensile and compressive strains for cracking of Al2O3 films grown by atomic layer depositionJournal of Applied Physics, 2011
- Failure mechanics of organic–inorganic multilayer permeation barriers in flexible electronicsComposites Science and Technology, 2011
- Thermo-mechanical properties of alumina films created using the atomic layer deposition techniqueSensors and Actuators A: Physical, 2010
- Thermomechanical properties of aluminum alkoxide (alucone) films created using molecular layer depositionActa Materialia, 2009
- Thin-Film Permeation-Barrier Technology for Flexible Organic Light-Emitting DevicesIEEE Journal of Selected Topics in Quantum Electronics, 2004
- Channel-cracking of thin films with the extended finite element methodEngineering Fracture Mechanics, 2003
- The role of initial flaw size, elastic compliance and plasticity in channel cracking of thin filmsThin Solid Films, 2002
- Three-dimensional effects in thin film fracture mechanicsMechanics of Materials, 1992
- Cracking of thin bonded films in residual tensionInternational Journal of Solids and Structures, 1992
- Mixed Mode Cracking in Layered Materials1991