Exploring the Combustion Performance of a Non-road Air-Cooled Two-Cylinder Turbocharged Diesel Engine
Preprint
- 15 July 2024
- preprint
- Published by MDPI AG in Preprints.org
Abstract
In order to explore the combustion performance of a non-road air-cooled two-cylinder turbocharged diesel engine, an experiment on the effects of engine compression ratio, combustion chamber shape and injection timing were systematically conducted in this study. Moreover, the effects of intake air conditions on combustion performance were numerically investigated using the one-dimensional simulation platform. The findings of this study could help provide new insights for promoting the sustainable development of diesel engines used in generator sets. The results show that the increase of intake air temperature can delay the combustion center of gravity, and improve the combustion performance and the sustainability of diesel engines. The decrease of intake air pressure will lead to a reduction in oxygen amount during the combustion process, thus causing a deterioration of cylinder pressure and combustion performance. By modifying the combustion chamber, the ignition delay and combustion duration are each extended by 1.6 degrees and 4.2 degrees under 100% engine load. The ignition delay and combustion duration are not obviously affected by modifying the combustion chamber shape under 25% and 50% loads. By increasing the compression ratio from 19.5 to 20.5, the ignition delay and combustion duration are shortened, which could enhance the cylinder pressure and heat release rate. However, reducing the compression ratio from 19.5 to 18.5 could significantly decrease the heat release rate. Under middle and low loads, combustion duration is less affected by injection timing. Under 100% load, the peak cylinder pressure increases to 11.4 MPa, and the ignition delay is shortened by advancing injection timing from -17°CA to -20°CA.Keywords
All Related Versions
This publication has 32 references indexed in Scilit:
- Effect of injector nozzle parameters on fuel consumption and soot emission of two-cylinder diesel engine for vehicleCase Studies in Thermal Engineering, 2022
- Effects of Overall-equivalence Ratios by Varying Intake Pressures and Exhaust Gas Recirculation Rates on the Natural Gas/Diesel Dual-fuel Combustion at a High Load ConditionInternational Journal of Automotive Technology, 2022
- A comparative study on the energy flow of a hybrid heavy truck between AMT and MT shift mode under local driving test cycleEnergy Conversion and Management, 2022
- Effects of injection timing and EGR on combustion and emissions characteristics of the diesel engine fuelled with acetone–butanol–ethanol/diesel blend fuelsEnergy, 2021
- Influence of cold-start time reduction on scooter emissions and fuel consumption over WMTC cycleEnergy, 2021
- Implementation of 1D–3D integrated model for thermal prediction in internal combustion enginesApplied Thermal Engineering, 2021
- Analysis and runners length optimization of the intake manifold of a 4-cylinder spark ignition engineEnergy Conversion and Management, 2019
- Comprehensive investigation of injection parameters effect on a turbocharged diesel engine based on detailed exergy analysisApplied Thermal Engineering, 2019
- A study on combined effect of high EGR rate and biodiesel on combustion and emission performance of a diesel engineApplied Thermal Engineering, 2017
- Performance optimization of a Two-Stroke supercharged diesel engine for aircraft propulsionEnergy Conversion and Management, 2016