Wax Deposition From Emulsion-water in Stratified Flow
Authors:
- 19 March 2015
- journal article
- research article
- Published by Taylor & Francis in Petroleum Science and Technology
- Vol. 33 (6) , 749-755
Abstract
The authors examine the wax deposition and establishes model to predict wax deposition thickness from emulsion-water in stratified flow. The deposit thickness on the top of the pipe increases first and then decreases, as the total inlet water cut decreases. In addition, the effect of the gelation becomes stronger as the emulsion water cut increases. The numerical calculation of wax deposition from emulsion-water in stratified flow is achieved considering the molecular diffusion and the gelation, predicting the deposit thickness on the top of the pipe. The predictions are consistent with the experimental results.Keywords
This publication has 5 references indexed in Scilit:
- Numerical modeling for stratified gas–liquid flow and heat transfer in pipelineApplied Energy, 2014
- The Effect of Operating Temperatures on Wax DepositionEnergy & Fuels, 2011
- Wax Deposition in the Oil/Gas Two-Phase Flow for a Horizontal PipeEnergy & Fuels, 2011
- Waxy Crude Oil Emulsion Gel: Impact on Flow AssuranceEnergy & Fuels, 2009
- Structure of waxy crude oil emulsion gelsJournal of Non-Newtonian Fluid Mechanics, 2008