Abstract
Rechargeable batteries are essential for energy storage, particularly in integrating renewable energy sources to address energy scarcity and global warming. 1,2 Among various technologies, vanadium redox flow batteries (VRFBs) have gained attention for large-scale applications due to their scalability, efficiencies and environmental benefits. 3,4 Electrodes play a crucial role in determining power density and efficiency, prompting extensive research to improve their properties and enhance the economic viability of VRFBs. 5,6 In the context of VRFBs, modifying electrode materials with ionic liquid (IL)-derived carbon has shown promising results. This study adopted a distinct strategy by directly pyrolyzing tailored ILs of ethylmethylimidazolium and tris-dialkylaminocyclopropenium cations and nitrile and phosphate anions under N2 at 1000 °C. Pyrolysis was conducted both in the presence and absence of carbon black as a support material. These novel IL-derived catalytic carbons were thoroughly characterized through physical, chemical and electrochemical techniques to identify favorable features such as high surface areas, abundant heteroatom content and rich defect sites. Their electrocatalytic activity was investigated using a standard three-electrode setup, where carbon ink prepared from these materials was drop-cast onto glassy carbon working electrodes (Fig. 1; graphic abstract). To assess practical applicability in VRFB systems, charge-discharge tests were performed using GF electrodes spray-coated with the same carbon ink. Before modifying the GF electrodes, optimization of pyrolysis conditions and strategic pairing of IL cations and anions is crucial for enhancing carbon yield and achieving the incorporation of specific heteroatoms in controlled quantities, thereby improving catalytic performance. 7 References 1. Chu, S.; Majumdar, A., Nature. 2012, 488, 294-303. 2. Dunn, B.; Kamath, H.; Tarascon, J. M., Sci. 2011, 334, 928-935. 3. Lim, J. W.; Kim, M.; Yu, Y. H.; Lee, D. G. Compos. Struct 2014, 118, 519-527. 4. Wang, W.; Luo, Q.; Li, B.; Wei, X.; Li, L.; Yang, Z., Adv. Funct. Mater. 2013, 23, 970-986. 5. Minke, C.; Kunz, U.; Turek, T., J. Power Sources 2017, 36, 105-114. 6. Minke, C.; Kunz, U.; Turek, T. J., Power Sources 2017, 342, 116-124. 7. Poudel, P.; Curnow, O.J.; Raghavan, H.; Wu, C.; Marshall, A.T., Carbon, 2025, 243, 120510. Figure 1