Numerical Study of Capillary Flow in Microchannels With Alternate Hydrophilic-Hydrophobic Bottom Wall
- 13 May 2009
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 131 (6) , 061202
Abstract
A two-dimensional numerical simulation of flow in patterned microchannel with alternate layers of different sizes of hydrophilic and hydrophobic surfaces at the bottom wall is conducted here. The effect of specified contact angle and working fluid (de-ionized (DI) water and ethanol) on capillary phenomena is observed here. The volume of fluid method is used for simulating the free surface flow in the microchannel. Meniscus profiles with varying amplitude and shapes are obtained under the different specified surface conditions. Nonsymmetric meniscus profiles are obtained by changing the contact angles of the hydrophilic and hydrophobic surfaces. A meniscus stretching parameter is defined here and its relation to the capillary phenomena in the microchannel is discussed. Flow variation increases as the fluid traverses alternately between the hydrophilic and hydrophobic regions. The pattern size and the surface tension of the fluid are found to have significant influence on the capillary phenomena in the patterned microchannel. Smaller pattern size produces enhanced capillary effect with DI water, whereas no appreciable gain is observed for ethanol. The magnitude of maximum velocity along the channel height varies considerably with the pattern size and the contact angle. Also, the rms velocity is found to be higher for smaller alternate patterned microchannel. The meniscus average velocity difference at the top and bottom walls increases for a dimensionless pattern size of 0.6 and thereafter it decreases with the increase in pattern size in the case of DI water with hydrophilic-hydrophobic pattern. Using such patterned microchannel, it is possible to manipulate and optimize fluid flow in microfluidic devices, which require enhanced mixing for performing biological reactions.Keywords
This publication has 22 references indexed in Scilit:
- Experimental and numerical investigation of capillary flow in SU8 and PDMS microchannels with integrated pillarsMicrofluidics and Nanofluidics, 2009
- Investigation of liquid–gas interfacial shapes in reduced gravitational environmentsInternational Journal of Mechanical Sciences, 2008
- Dynamics of Wetting from an Experimental Point of ViewAnnual Review of Materials Research, 2008
- Contact angle effects on microdroplet deformation using CFDApplied Mathematical Modelling, 2006
- Capillary Filling Flows inside Patterned‐Surface MicrochannelsChemical Engineering & Technology, 2006
- The marching velocity of the capillary meniscus in a microchannelJournal of Micromechanics and Microengineering, 2003
- Micro-channel filling flow considering surface tension effectJournal of Micromechanics and Microengineering, 2002
- Wetting: statics and dynamicsReviews of Modern Physics, 1985
- On the Spreading of Liquids on Solid Surfaces: Static and Dynamic Contact LinesAnnual Review of Fluid Mechanics, 1979
- The Dynamics of Capillary FlowPhysical Review B, 1921