Microstructure and Properties of Electromagnetic Field-Assisted Laser-Clad Norem02 Iron-Based Cemented Carbide Coating
Open Access
Abstract
An electromagnetic field-assisted (EMF-assisted) laser cladding technique was used to prepare Norem02 iron-based cemented carbide coatings on 304 stainless steels. The coatings then were characterized in terms of their microstructure, microhardness, residual stress, and wear resistance. The results indicated that EMF did not change the phase composition of the Norem02 iron-based cemented carbide coating, but significantly affected its microstructure and properties. EMF accelerated the formation of more uniform and refined microstructure. With an increasing current intensity of EMF to 40 A, the dendritic and columnar crystal structure of the coating gradually transformed into uniform and fine equiaxed grains. However, when the EMF current intensity was increased to 80 A, a small number of small dendrites and columnar crystals began to appear at the top and bottom of the coating. Accordingly, the microhardness first increased, then decreased, and achieved a max of 376.9 HV0.2 at EMF current intensity of 40 A. EMF also improved the wear resistance of the coatings, reduced the cracking sensitivity, and reduced residual stress on the surface by 45.2%.Keywords
Funding Information
- CGN-USTB Joint Research and Development Center for Advanced Energy Materials and Service Safety (2022-0476)
This publication has 24 references indexed in Scilit:
- Effects of laser cladding on fatigue performance of AISI 4340 steel in the as-clad and machine treated conditionsJournal of Materials Processing Technology, 2017
- Improving rail wear and RCF performance using laser claddingWear, 2016
- Reinforcement mechanism and wear resistance of Al2O3/Fe-Cr-Mo steel composite coating produced by laser claddingSurface and Coatings Technology, 2016
- Study of cobalt-free, Fe-based alloy powder used for sealing surfaces of nuclear valves by laser claddingNuclear Engineering and Design, 2012
- Characteristics of Fe-based alloy coating produced by plasma cladding processMaterials Science and Engineering: A, 2007
- Sliding wear behavior of hardfacing alloys in a pressurized water environmentWear, 2007
- Effect of a small increase in the Ni content on the properties of a laser surface clad Fe-based alloyApplied Surface Science, 2007
- Surface analysis of laser cladded Stellite exposed to self-mated high load dry slidingWear, 2006
- Selection of hardfacing material for components of the Indian Prototype Fast Breeder ReactorJournal of Nuclear Materials, 2004
- The galling wear resistance of new iron-base hardfacing alloys: a comparison with established cobalt- and nickel-base alloysSurface and Coatings Technology, 1995