Wear and Friction Properties of Boronitrocarburized AISI 1018 Steel Using the Powder-Packing Method in a Single Stage
Open Access
- 30 May 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (11) , 5451
Abstract
The thermochemical diffusion treatment of boronitrocarburizing in a single stage was conducted on AISI 1018 steel using the powder-packing method. The treatment was performed at temperatures of 1123 K, 1173 K, and 1223 K for 8 h. The specimens were characterized using Scanning Electron Microscopy (SEM), Energy-Dispersive Spectroscopy (EDS) and X-ray diffraction (XRD) enabling a superficial elemental analysis of B, N, and C diffusion into the substrate. The tribological effects of friction and wear under dry conditions were analyzed through a pin-on-disc test, employing an aluminum oxide (Al2O3) sphere and a profilometer to measure mass loss. The study concluded that the sample treated at 1173 K exhibited the best tribological performance, showing the lowest coefficient of friction (), while the samples treated at 1123 K and 1223 K exhibited coefficients of friction of and , respectively. All treated samples showed a reduction in the coefficient of friction compared to the control sample ().
Keywords
This publication has 52 references indexed in Scilit:
- Effect of boron element on microstructure and mechanical properties of 316L stainless steel manufactured by selective laser meltingJournal of Materials Research and Technology, 2023
- Surface characterization of a modified cold work tool steel treated by powder‐pack boronizingMaterialwissenschaft und Werkstofftechnik, 2022
- Dry Sliding Wear Test on Borided AISI 1018 Steel Under Pin-on-Disc ConfigurationMetallurgical and Materials Transactions A, 2021
- Historical Review on the Boriding Process using Bibliometric AnalysisTransactions of the Indian Institute of Metals, 2021
- Properties and Growth Kinetics of the Boride Layer of a Boriding-Strengthened Fe-Based Powder Metallurgical MaterialStrength of Materials, 2021
- Wear resistance of diffusion annealed borided AISI 1018 steelMaterials Letters, 2020
- Boro-nitriding coating on pure iron by powder-pack boriding and nitriding processesMaterials Letters, 2016
- Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding MethodTribology Letters, 2010
- Effects of boronizing process on the surface roughness and dimensions of AISI 1020, AISI 1040 and AISI 2714Journal of Materials Processing Technology, 2009
- Layer-growth kinetics on gaseous nitriding of pure iron: Evaluation of diffusion coefficients for nitrogen in iron nitridesMetallurgical and Materials Transactions A, 1995