Study on morphology and corrosion resistance of electroless Ni–P coatings
Authors:
- A. R. RahimiARA. R. Rahimi
- H. ModarresHMH. Modarres
- M. AbdoussMAM. Abdouss
- 1 July 2009
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 25 (5) , 367-371
Abstract
The nickel–phosphorus (Ni–P) coating was obtained by electroless plating. The effect of heat treatment and the type of stabiliser on hardness value, corrosion resistance and microstructure of Ni–P coatings were studied by scanning electron microscope, X-ray difractometer and electrochemical impedance spectroscopy method. The Ni–P electroless coating contains ∼9·18 wt-%P and 10·68 wt-%P according to the type of stabilising agent, thiourea and lead acetate respectively. The results showed that coatings obtained using lead acetate as stabiliser have higher corrosion resistance than ones that obtained from bath contained thiourea as stabiliser. The coatings deposited from an electroless bath have the increased hardness after heat treatment due to the transformation of amorphous phase Ni–P to crystalline phase Ni3P. Corrosion resistance of Ni–P coatings increased after heat treatment at 400°C.Keywords
This publication has 30 references indexed in Scilit:
- Study on the nano-composite electroless coating of Ni–P/AuJournal of Alloys and Compounds, 2008
- Effect of organic additives on the corrosion resistance properties of electroless nickel depositsThin Solid Films, 2008
- The cavitation erosion behavior of electroless Ni–P–SiC composite coatingWear, 2006
- Incorporation of nano zinc oxide for improvement of electroless nickel platingApplied Surface Science, 2006
- Wear behavior of electroless Ni–P–B4C composite coatingsWear, 2006
- Friction and wear of electroless NiP and NiP+PTFE coatingsWear, 2005
- Corrosion resistance properties of electroless nickel composite coatingsElectrochimica Acta, 2004
- Electroless Ni–P composite coatingsJournal of Applied Electrochemistry, 2003
- Electroless alloy/composite coatings: A reviewSādhanā, 2003
- The effect of heat treatment on the microstructure of electroless Ni–P coatings containing SiC particlesThin Solid Films, 2002