Investigation on synchronous reluctance machines with different rotor topologies and winding configurations
Authors:
Open Access
- 15 September 2017
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 12 (1) , 45-53
Abstract
This study investigates the influence of rotor topologies and winding configurations on the electromagnetic performance of three‐phase synchronous reluctance machines (SynRM) with different slot/pole number combinations, e.g. 12‐slot/4‐pole and 12‐slot/8‐pole. Transversally laminated synchronous reluctance rotors with both round flux barrier and angled flux barrier have been considered, as well as the doubly salient (DS) rotor as that used in switched reluctance machines. Both concentrated and distributed winding configurations are accounted for, i.e. single‐layer and double‐layer conventional and mutually coupled windings, as well as fully pitched winding. The machine performance in terms of d ‐ and q ‐axis inductances, on‐load torque, copper loss, and iron loss have been investigated using 2D finite‐element analysis. With appropriate rotor topology, 12‐slot/4‐pole and 12‐slot/8‐pole machines with fully pitched and double‐layer mutually coupled windings can achieve similar torque capacity, which are higher than the machines with other winding configurations. In addition, the synchronous reluctance machine with round flux barrier can have lower iron loss than DS reluctance machine under different working conditions. The prototypes of 12‐slot/8‐pole single layer and double layer, DS SynRM have been built to validate the predictions in terms of inductances and torques.Keywords
This publication has 23 references indexed in Scilit:
- Performance Comparison of Doubly Salient Reluctance Machine Topologies Supplied by Sinewave CurrentsIEEE Transactions on Industrial Electronics, 2016
- Application of Fractional-Slot Concentrated Windings to Synchronous Reluctance MotorsIEEE Transactions on Industry Applications, 2014
- Comparative Study of Classical and Mutually Coupled Switched Reluctance Motors Using Multiphysics Finite-Element ModelingIEEE Transactions on Industrial Electronics, 2013
- Novel High-Performance SynRM Design Method: An Easy Approach for A Complicated Rotor TopologyIEEE Transactions on Industrial Electronics, 2013
- Comparison of Interior and Surface PM Machines Equipped With Fractional-Slot Concentrated Windings for Hybrid Traction ApplicationsIEEE Transactions on Energy Conversion, 2012
- Modification in Rotor Pole Geometry of Mutually Coupled Switched Reluctance Machine for Torque Ripple MitigatingIEEE Transactions on Magnetics, 2011
- Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and ChallengesIEEE Transactions on Industrial Electronics, 2009
- Analysis of Surface Permanent Magnet Machines With Fractional-Slot Concentrated WindingsIEEE Transactions on Energy Conversion, 2006
- Optimal design of switched reluctance motorsIEEE Transactions on Industrial Electronics, 2002
- Rotor design optimization of synchronous reluctance machineIEEE Transactions on Energy Conversion, 1994