Water resistance of composite binders containing phosphogpysum with different pretreatment processes
Authors:
- 1 April 2012
- journal article
- Published by Emerald Publishing in Advances in Cement Research
- Vol. 24 (2) , 111-120
Abstract
The influence of pretreated phosphogypsum on water resistance of composite binders containing phosphogypsum (CBPG) was investigated. Six pretreatment processes in total were conducted on phosphogypsum using autoclaving and calcination. Three parameters of the CBPG mortars were comparatively studied to evaluate their water resistance: the ratio of the compressive strength in the wet-saturated state to that in the dry state (W/D); weight loss after static water attack (WLSW); and weight loss after flowing water attack (WLFW). The crystalline phases could be transformed and the impurities could be effectively purified for original phosphogypsum by the pretreatment process. Therefore, water resistance of the CBPG mortars from pretreated phosphogypsum was improved significantly when compared to that of the mortars from original phosphogypsum. Regarding the weight loss and strength after static or flowing water attacks, WLSW and WLFW could effectively evaluate the water resistance of CBPG mortars, when compared with traditional evaluation by W/D.Keywords
This publication has 18 references indexed in Scilit:
- Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cementConstruction and Building Materials, 2010
- Valorization of phosphogypsum as hydraulic binderJournal of Hazardous Materials, 2008
- Utilization of phosphogypsum as raw and calcined material in manufacturing of building productsConstruction and Building Materials, 2008
- An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cementCement and Concrete Research, 2003
- Fly ash–lime–phosphogypsum hollow blocks for walls and partitionsBuilding and Environment, 2003
- A plant investigation into the use of treated phosphogypsum as a set-retarder in OPC and an OPC/fly ash blendMinerals Engineering, 2001
- Strength and water absorption for gypsum—cement—silica fume blends of improved performanceAdvances in Cement Research, 1998
- Some aspects of the durability of a phosphogypsum-lime-fly ash binderConstruction and Building Materials, 1996
- Gypsum of improved performance using blends with Portland cement and silica fumeAdvances in Cement Research, 1994
- Chemistry of by‐product gypsum and plaster. I. Identity of an important solid solution impurityJournal of Chemical Technology & Biotechnology, 1971