Ultralong Cycling and Interfacial Regulation of Bilayer Heterogeneous Composite Solid-State Electrolytes in Lithium Metal Batteries
Authors:
- 21 June 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (26) , 33578-33589
Abstract
Under the background of "carbon neutral", lithium-ion batteries (LIB) have been widely used in portable electronic devices and large-scale energy storage systems, but the current commercial electrolyte is mainly liquid organic compounds, which have serious safety risks. In this paper, a bilayer heterogeneous composite solid-state electrolyte (PLPE) was constructed with the 3D LiX zeolite nanofiber (LiX-NF) layer and in-situ interfacial layer, which greatly extends the life span of lithium metal batteries (LMB). LiX-NF not only offers a continuous fast path for Li+, but also zeolite's Lewis acid-base interaction can immobilize large anions, which significantly improves the electrochemical performance of the electrolyte. In addition, the in-situ interfacial layer at the electrode-electrolyte interface can effectively facilitate the uniform deposition of Li+ and inhibit the growth of lithium dendrites. As a result, the Li/Li battery assembled with PLPE can be stably cycled for more than 2500 h at 0.1 mA cm-2. Meanwhile, the initial discharge capacity of the LiFePO4/PLPE/Li battery can be 162.43 mAh g-1 at 0.5 C, and the capacity retention rate is 82.74% after 500 cycles. These results emphasize that this bilayer heterogeneous composite solid-state electrolyte has distinct properties and shows excellent potential for application in LMB.Keywords
Funding Information
- Key Research and Development Program of Zhejiang Province (2022C01033)
This publication has 57 references indexed in Scilit:
- Inorganic‐Rich Interphase Induced by Boric Oxide Solid Acid toward Long Cyclic Solid‐State Lithium‐Metal BatteriesAdvanced Functional Materials, 2023
- Impact of Fluorine‐Based Lithium Salts on SEI for All‐Solid‐State PEO‐Based Lithium Metal BatteriesAdvanced Functional Materials, 2023
- Synergistic Effect of Crosslinked Organic–Inorganic Composite Protective Layer for High Performance Lithium Metal BatteriesAdvanced Functional Materials, 2023
- Surface Li 2 CO 3 Mediated Phosphorization Enables Compatible Interfaces of Composite Polymer Electrolyte for Solid‐State Lithium BatteriesAdvanced Functional Materials, 2023
- Constructing Highly Conductive and Thermomechanical Stable Quasi‐Solid Electrolytes by Self‐Polymerization of Liquid Electrolytes within Porous Polyimide Nanofiber FilmsAdvanced Functional Materials, 2022
- High Performance Composite Polymer Electrolytes for Lithium‐Ion BatteriesAdvanced Functional Materials, 2021
- Critical Current Density in Solid‐State Lithium Metal Batteries: Mechanism, Influences, and StrategiesAdvanced Functional Materials, 2021
- All‐Solid‐State Batteries with a Limited Lithium Metal Anode at Room Temperature using a Garnet‐Based ElectrolyteAdvanced Materials, 2020
- A Flexible Ceramic/Polymer Hybrid Solid Electrolyte for Solid‐State Lithium Metal BatteriesAdvanced Materials, 2020
- Succinonitrile as a Versatile Additive for Polymer ElectrolytesAdvanced Functional Materials, 2007