RDE Testing of Passenger Cars: The Effect of the Cold Start on the Emissions Results
- 2 April 2019
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper discusses the importance of the inclusion of emissions from the cold start event during legislative on-road tests on passenger cars (RDE - real driving emissions tests conducted under real-world driving conditions, as defined by EU legislation). Results from a recently-registered gasoline-powered vehicle are presented, with the main focus on the comparison of exhaust emission results: excluding/including the cold start during the initial phase of the RDE test. Cold start is the most challenging aspect of emissions control for vehicles with spark ignition engines and the inclusion of the cold start event in RDE test procedure has wide-ranging implications both for the testing process and compliance with RDE legislation via optimisation of aftertreatment systems and the engine calibration. In addition to some theoretical arguments, the results of an RDE-compliant test performed using the aforementioned procedures are presented. The tests were carried out on a passenger car with a spark-ignition engine with direct fuel injection; the vehicle met the Euro 6c emission standard. For the test performed, the impact of the emissions associated with cold start have a smaller impact than was assumed, because the distance covered by an RDE-compliant test is high (>48 km) and the ambient temperature was not low. However, the not-to-exceed limits must also be respected for the urban phase of the test, where the number of kilometres available to ‘dilute’ the cold start is more limited. Implications for the testing process, emissions control and the future emissions profile for vehicles with such engines are discussed.Keywords
This publication has 14 references indexed in Scilit:
- Real World Driving: Emissions in Highly Congested TrafficSAE International Journal of Advances and Current Practices in Mobility, 2017
- Fuel consumption and CO 2 emissions from passenger cars in Europe – Laboratory versus real-world emissionsProgress in Energy and Combustion Science, 2017
- The difference between reported and real-world CO 2 emissions: How much improvement can be expected by WLTP introduction?Transportation Research Procedia, 2017
- Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutionsEnergy Conversion and Management, 2014
- Low-temperature cold-start gaseous emissions of late technology passenger carsApplied Energy, 2013
- Low Ambient Temperature Cold Start Emissions of Gaseous and Solid Pollutants from Euro 5 Vehicles featuring Direct and Indirect Injection Spark-Ignition EnginesSAE International Journal of Fuels and Lubricants, 2013
- How People Use Their Vehicles: Statistics from the 2009 National Household Travel SurveySAE International Journal of Advances and Current Practices in Mobility, 2012
- Excess Emissions and Fuel Consumption of Modern Spark Ignition Passenger Cars at Low Ambient TemperaturesSAE International Journal of Advances and Current Practices in Mobility, 2012
- The effect of a low ambient temperature on the cold-start emissions and fuel consumption of passenger carsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2011
- The Comparison of the Emissions from Light Duty Vehicle in On-road and NEDC TestsSAE International Journal of Advances and Current Practices in Mobility, 2010