Enhanced Biocorrosion Resistance and Cellular Response of a Dual-Phase High Entropy Alloy through Reduced Elemental Heterogeneity
- 21 January 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 3 (2) , 1233-1244
Abstract
The leaching out of toxic elements from metallic bioimplants have serious repercussions including allergies, peripheral neuritis, cancer and Alzheimer disease, leading to revision or replacement surgeries. The development of advanced structural materials with excellent biocompatibility and superior corrosion resistance in physiological environment holds great significance. High entropy alloys (HEAs) with huge compositional design space, outstanding mechanical and functional properties can be promising for bio-implant applications. However, microstructural heterogeneity arising from elemental segregation in these multi-principle alloy systems is the Achilles heel in the development of next-generation HEAs. Here, we demonstrate a pathway to homogenize the microstructure of a bio-compatible dual-phase HEA, comprising of refractory elements, namely MoNbTaTiZr through severe surface deformation using stationary friction processing (SFP). The strain and temperature field during processing homogenized the elemental distribution, which was otherwise unresponsive to conventional annealing treatments. Nearly fifteen minutes of SFP treatment resulted in significant elemental homogenization across dendritic and inter-dendritic regions, similar to a week-long annealing treatment at 1275 K. The SFP processed alloy showed nearly six-times higher bio-corrosion resistance compared to its as-cast counterpart. X-ray photoelectron spectroscopy was used to investigate the nature of the oxide layer formed on the specimens. Superior corrosion behavior of processed alloy was attributed to the formation of a stable passive layer with zirconium-oxide as the primary constituent and higher hydrophobicity. Biocompatibility studies, performed using Human mesenchymal stem cell line, showed higher viability for the processed HEA compared to its as-cast counterpart as well as conventional metallic biomaterials including stainless steel (SS316L) and titanium alloy (Ti6Al4V).Keywords
Funding Information
- Indo-US Science and Technology Forum (IUSSTF/JC-047/2017)
This publication has 54 references indexed in Scilit:
- Chances and limitations of nanosized titanium dioxide practical application in view of its physicochemical propertiesDiscover Nano, 2015
- Metallic implant biomaterialsMaterials Science and Engineering: R: Reports, 2015
- Cell Response to Nanocrystallized Metallic Substrates Obtained through Severe Plastic DeformationACS Applied Materials & Interfaces, 2014
- Ti based biomaterials, the ultimate choice for orthopaedic implants – A reviewProgress in Materials Science, 2009
- Magnesium and its alloys as orthopedic biomaterials: A reviewBiomaterials, 2006
- Comparison of metal release from various metallic biomaterials in vitroBiomaterials, 2005
- Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMoBiomaterials, 2004
- The electrochemical and mechanical behavior of passivated and TiN/AlN-coated CoCrMo and Ti6Al4V alloysBiomaterials, 2004
- Examination of in vivo influences on bioluminescent microbial assessment of corrosion product toxicityBiomaterials, 2001
- Titanium alloys in total joint replacement—a materials science perspectiveBiomaterials, 1998