Microporous Formation Mechanism of Biaxial Stretching PA6/PP Membranes with High Porosity and Uniform Pore Size Distribution
Open Access
Abstract
The low porosity and wide pore size distribution of biaxial stretching PP microporous membranes continue to be the primary impediments to their industrial application. To solve this problem, there is a critical and urgent need to study the micropore-forming mechanism of PP membranes. In this research, the interfacial micropore formation mechanism of PA6/PP membranes during biaxial stretching was investigated. PA6/PP membranes containing spherical PA6 and fibrillar PA6 were found to exhibit different interfacial micropore formation mechanisms. Numerous micropores were generated in the PA6/PP membranes, containing PA6 spherical particles via the interface separation between the PP matrix and PA6 spherical particles during longitudinal stretching. Subsequent transverse stretching further expanded the two-phase interface, promoting the breakdown and fibrosis of the PP matrix and forming a spider-web-like microporous structure centered on spherical PA6 particles. In PA6/PP membranes with PA6 fibers, fewer micropores were generated during longitudinal stretching, but the subsequent transverse stretching violently separated the PA6 fibers, resulting in a dense fiber network composed of PA6 fibers interwoven with PP fibers. Crucially, the PA6/PP biaxial stretching of microporous membranes presented an optimized pore structure, higher porosity, narrower pore size distribution, and better permeability than β-PP membranes. Furthermore, this study explored a new approach to the fabrication of high-performance PA6/PP microporous membranes, with good prospects for potential industrial application.Keywords
Funding Information
- National Natural Science Foundation of China (51873112, 51721091)
- National Natural Science Foundation of China (51873112, 51721091)
This publication has 46 references indexed in Scilit:
- Separators for Lithium‐Ion Batteries: A Review on the Production Processes and Recent DevelopmentsEnergy Technology, 2015
- Unprecedented Access to Strong and Ductile Poly(lactic acid) by Introducing In Situ Nanofibrillar Poly(butylene succinate) for Green PackagingBiomacromolecules, 2014
- Morphology, structure, and properties of poly(lactic acid) microporous films containing poly(butylene terephthalate) fine fibers fabricated by biaxial stretchingJournal of Applied Polymer Science, 2014
- A review of recent developments in membrane separators for rechargeable lithium-ion batteriesEnergy & Environmental Science, 2014
- Fabrication of microporous polymeric membranes by melt processing of immiscible blendsJournal of Membrane Science, 2003
- Effect of polymer blending and drawing conditions on properties of polyethylene separator prepared for Li-ion secondary batteryJournal of Power Sources, 2002
- Melt processed microporous films from compatibilized immiscible blends with potential as membranesPolymer Engineering & Science, 2002
- Polypropylene blends with potential as materials for microporous membranes formed by melt processingPolymer, 2002
- Crystal transformation and micropore formation during uniaxial drawing of β-form polypropylene filmPolymer, 1995
- Microvoid formation process during the plastic deformation of β-form polypropylenePolymer, 1994