Determining the laminar burning velocity of nitrogen diluted dimethoxymethane ( OME 1 ) using the heat‐flux burner method: Numerical and experimental investigations
Authors:
Open Access
- 11 October 2020
- journal article
- research article
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 45 (2) , 2824-2836
Abstract
Premixed flames play a prominent role in combustion systems such as aircraft combustors, gas turbines and internal combustion engines. Current fuels are also derived from fossil sources, including coal, petrol, gasoline, natural gas or liquefied petroleum gas. Alternatively, liquid and gaseous biofuels, such as ethanol and biodiesel, hydrogen, wood gas or coal gas, can be used with appropriate modifications. Furthermore, the components of oxygenated fuel are known for their reduction of soot particles in diesel combustion processes while having little effect on nitrogen oxide (NOX) emissions. The advantage of C1‐oxygenate dimethoxymethane (OME1, also called “methylal” or DMM) is the lack of CC bonds in their molecular structure. OME1 belongs to the group of oxymethylene ethers (OMEn) with the molecular structure CH3O(CH2O)nCH3 where n = 1 (short molecular structure: C3H8O2). This experimental and numerical study aims to investigate the laminar burning velocity (LBV) of the oxymethylene ether (OMEn, n = 1), the influence of temperature and nitrogen dilution. To our knowledge, no studies have been conducted with regards to nitrogen dilution during the measurements of OME1 burning velocity. In this study, a heat‐flux burner setup was used to investigate the LBV for equivalence ratios from 0.7 to 1.6. The experimental LBV data shows a decreasing nonlinear influence of nitrogen dilution effects for 0% to 70% and increasing linear with preheating up to 373 K. The numerical results were compared with the experiments conducted with simple alcohols (ethanol) and C3 hydrocarbon fuels (propane). Existing numerical reaction mechanisms can only partially reproduce the new experimental data. Finally, a sensitivity analysis was conducted by changing various parameters during the numerical investigations, in order to clarify the discrepancy.Keywords
This publication has 37 references indexed in Scilit:
- A review of synthetic fuels for passenger vehiclesEnergy Reports, 2019
- Polyoxymethylene dimethyl ethers as clean diesel additives: Fuel freezing and predictionFuel, 2019
- Exploration of the oxidation chemistry of dimethoxymethane: Jet-stirred reactor experiments and kinetic modelingCombustion and Flame, 2018
- Cleaner production of cleaner fuels: wind-to-wheel – environmental assessment of CO2-based oxymethylene ether as a drop-in fuelEnergy & Environmental Science, 2017
- Reaction kinetics and equilibrium parameters for the production of oxymethylene dimethyl ethers (OME) from methanol and formaldehydeChemical Engineering Science, 2017
- From methanol to the oxygenated diesel fuel poly(oxymethylene) dimethyl ether: An assessment of the production costsFuel, 2016
- Oxygenate screening on a heavy-duty diesel engine and emission characteristics of highly oxygenated oxymethylene ether fuelFuel, 2015
- Poly(oxymethylene) dimethyl ethers as components of tailored diesel fuel: Properties, synthesis and purification conceptsFuel, 2010
- Biofuels and synthetic fuels in the US and China: A review of Well-to-Wheel energy use and greenhouse gas emissions with the impact of land-use changeEnergy & Environmental Science, 2009
- Mechanism of smokeless diesel combustion with oxygenated fuels based on the dependence of the equivalence ration and temperature on soot particle formationInternational Journal of Engine Research, 2002