New Bond Coat Materials for Thermal Barrier Coating Systems Processed Via Different Routes
Open Access
- 27 June 2017
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 209 (1) , 012045
Abstract
This paper aims at describing the development of new Ru-based Bond Coats (BC) as part of Thermal Barrier Coatings. The challenge of this research was to obtain an adherent and uniform layer of alumina protective layer after high temperature exposure. We have prepared a RuAl 50/50 at% alloy in an induction furnace which was subsequently subjected to oxidation in an electric furnace, in air, at 1100C, for 10h and 100h. Mechanical alloying of Ru and Al powders was another processing route used in an attempt to obtain a stoichiometric RuAl. The alloy was sintered by Spark Plasma Sintering (SPS) and then oxidized at 1100C for 1 and10h. The alloys obtained as such were analysed before and after oxidation using advanced microscopy techniques (SEM and TEM). The encouraging results in case of RuAl alloys prepared by induction melting reveal that we obtained an adherent and uniform layer of alumina, free of delta-Ru. The results for the samples processed by powder metallurgy were positive but need to be further investigated. We should note here the novelty of this method for this particular type of application – as a BC part of a TBC system.Keywords
This publication has 10 references indexed in Scilit:
- New Bond Coat Materials for Thermal Barrier Coating Systems Processed Via Different RoutesIOP Conference Series: Materials Science and Engineering, 2017
- Multilayered ruthenium-modified bond coats for thermal barrier coatingsMetallurgical and Materials Transactions A, 2006
- Emerging materials and processes for thermal barrier systemsCurrent Opinion in Solid State and Materials Science, 2004
- Oxidation of Simple and Pt-Modified Aluminide Diffusion Coatings on Ni-Base Superalloys—I. Oxide Scale MicrostructureOxidation of Metals, 2003
- Cyclic oxidation behavior of palladium-modified aluminide coatingSurface and Coatings Technology, 2003
- The lateral growth strain accompanying the formation of a thermally grown oxideActa Materialia, 2003
- Effect of composition on the oxidation and hot corrosion resistance of NiAl doped with precious metalsSurface and Coatings Technology, 2000
- Mechanisms governing the performance of thermal barrier coatingsCurrent Opinion in Solid State and Materials Science, 1999
- An assessment of the oxidation resistance of an iridium and an iridium/platinum low-activity aluminide/MarM002 system at 1100°CSurface and Coatings Technology, 1999
- Protective coatings in the gas turbine engineSurface and Coatings Technology, 1994