Localized Corrosion of Nanocrystalline 304 Type Stainless Steel Films
Authors:
- R.B. InturiRIR.B. Inturi
- 1 May 1992
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 48 (5) , 398-403
Abstract
Nanocrystalline (grain size approximately 25 nm) stainless steel films were prepared by sputter-depositing the conventional 304 type stainless steel on glass substrates. Despite the same chemical composition, the breakdown potential (Eb) of the sputtered stainless steel films is found to be approximately 850 mV higher than that of the conventional material. Also, the breakdown potentials of the sputtered nanocrystalline stainless steel films are close to those of the amorphous FeCr18Ni9W11 and FeCr10P13C7 alloys reported in the literature. The high corrosion resistance of the sputtered films is attributed to the smaller grain size of the films.Keywords
This publication has 3 references indexed in Scilit:
- The Pitting Corrosion Resistance of Microcrystalline Coatings of Sputtered 321 Stainless SteelCorrosion, 1990
- Corrosion Resistance of Amorphous FeNiCrW AlloysCorrosion, 1984
- High Corrosion Resistance of Chromium-Bearing Amorphous Iron Alloys in Neutral and Acidic Solutions Containing ChlorideCorrosion, 1976