Pressure Pulsation Signal Analysis for Centrifugal Compressor Blade Crack Determination
Authors:
Open Access
- 1 January 2014
- journal article
- research article
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2014 (1)
Abstract
Blade is a key piece of component for centrifugal compressor. But blade crack could usually occur as blade suffers from the effect of centrifugal forces, gas pressure, friction force, and so on. It could lead to blade failure and centrifugal compressor closing down. Therefore, it is important for blade crack early warning. It is difficult to determine blade crack as the information is weak. In this research, a pressure pulsation (PP) sensor installed in vicinity to the crack area is used to determine blade crack according to blade vibration transfer process analysis. As it cannot show the blade crack information clearly, signal analysis and empirical mode decomposition (EMD) are investigated for feature extraction and early warning. Firstly, signal filter is carried on PP signal around blade passing frequency (BPF) based on working process analysis. Then, envelope analysis is carried on to filter the BPF. In the end, EMD is carried on to determine the characteristic frequency (CF) for blade crack. Dynamic strain sensor is installed on the blade to determine the crack CF. Simulation and experimental investigation are carried on to verify the effectiveness of this method. The results show that this method can be helpful for blade crack classification for centrifugal compressors.Keywords
Funding Information
- National Natural Science Foundation of China (51175057, DUT14ZD204)
- Fundamental Research Funds for the Central Universities (51175057, DUT14ZD204)
This publication has 16 references indexed in Scilit:
- Failure investigation of a large pump-turbine runnerEngineering Failure Analysis, 2012
- A Method Based on Multi-Sensor Data Fusion for Fault Detection of Planetary GearboxesSensors, 2012
- Experimental crack propagation and failure analysis of the first stage compressor blade subjected to vibrationEngineering Failure Analysis, 2009
- Failure analysis of Ti6Al4V gas turbine compressor bladesEngineering Failure Analysis, 2008
- Fatigue failure of a compressor bladeEngineering Failure Analysis, 2008
- Instantaneous energy density as a feature for gear fault detectionMechanical Systems and Signal Processing, 2006
- Dynamic modelling of spur gear pair and application of empirical mode decomposition-based statistical analysis for early detection of localized tooth defectJournal of Sound and Vibration, 2006
- Gearbox fault diagnosis using empirical mode decomposition and Hilbert spectrumMechanical Systems and Signal Processing, 2006
- Helicopter rotor blade frequency evolution with damage growth and signal processingJournal of Sound and Vibration, 2005
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1998