Simulation of AC Loss in the Armature Windings of a 100 kW All-HTS Motor With Various (RE)BCO Conductor Considerations
Open Access
- 22 September 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 130968-130980
Abstract
Superconducting machine designs have historically focused on an isolated, cryogenic rotor and conventional (copper) stator due to unacceptable levels of AC loss in a superconducting stator. Thus, AC loss reduction in the armature windings is one of the key issues for achieving practical all-superconducting motors that could deliver an unprecedented power density and significantly reduce machine complexity. In this paper, a 100 kW, 1500 rpm, all - HTS motor operating at 65 K is designed and AC loss simulations in HTS armature windings wound with different types of (RE)BCO conductor arrangements are carried out by implementing the T-A formulation and a rotating mesh using commercial FEM software COMSOL Multiphysics. Either 4 mm-wide (RE)BCO conductors, 14/2 (14 strands, each strand is 2 mm wide) (RE)BCO Roebel cables, or striated (RE)BCO conductors with four 1 mm-wide filaments are considered in the armature windings. The simulation results show that armature windings wound with Roebel cables or striated conductors can significantly reduce the AC loss in the armature windings compared to windings wound with 4 mm-wide conductors. It is also shown that the AC loss in the armature winding wound with the 4 mm-wide (RE)BCO conductors decreases with decreasing operating temperature. The AC loss reduction can be attributed to the reduced magnetic field penetration associated with the increased $I_{\mathrm {c}}$ in the winding. Finally, a 2% AC loss reduction can be achieved in the armature winding wound with (RE)BCO conductors with asymmetric $I_{\mathrm {c}}(B$ , $\theta$ ) characteristics by simply flipping the direction of the conductors of the armature winding. The simulation results in this work have practical implications for designing all-HTS superconducting rotating machines. Such machines could be suitable for H 2 powered electric vehicles like large interstate trucks, heavy machinery, or locomotives.Keywords
Funding Information
- New Zealand Ministry of Business, Innovation and Employment (RTVU1707)
- Strategic Science Investment Fund “Advanced Energy Technology Platforms” (RTVU2004)
- Engineering and Physical Sciences Research Council (EPSRC) Early Career Fellowship (EP/P020313/1)
This publication has 33 references indexed in Scilit:
- Fully filamentized HTS coated conductor via striation and selective electroplatingPhysica C: Superconductivity and its Applications, 2013
- 3D modeling of high-Tcsuperconductors by finite element softwareSuperconductor Science and Technology, 2011
- Development of YBCO Roebel cables for high current transport and low AC loss applicationsJournal of Physics: Conference Series, 2010
- Transport AC loss characteristics of a nine strand YBCO Roebel cableSuperconductor Science and Technology, 2010
- Narrow strand YBCO Roebel cable for lowered AC lossJournal of Physics: Conference Series, 2008
- The dependence of AC loss characteristics on the space in stacked YBCO conductorsSuperconductor Science and Technology, 2007
- Comparison of the total AC loss characteristics in YBCO conductors and BSCCO multifilamentary tapes with identical engineering critical current densitiesSuperconductor Science and Technology, 2006
- Magnetization losses in multifilament coated superconductorsApplied Physics Letters, 2005
- AC loss reduction of YBCO coated conductors by multifilamentary structureSuperconductor Science and Technology, 2004
- Influence of film width and magnetic field orientation on AC loss in YBCO thin filmSuperconductor Science and Technology, 2004