Thermal and Mechanical Assessment of PLA-SEBS and PLA-SEBS-CNT Biopolymer Blends for 3D Printing
Open Access
- 5 July 2021
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 11 (13) , 6218
Abstract
Polylactic acid (PLA) is one of the most promising biopolymers often used as a raw material in 3D printing in many industrial areas. It has good mechanical properties, is characterized by high strength and stiffness, but unfortunately, it has some disadvantages; one is brittleness, and the other is slow crystallization. Amounts of 1–5% SEBS (styrene-ethylene-butylene-styrene) thermoplastic elastomer were blended into the PLA and the thermal and mechanical properties were investigated. DSC (Differential Scanning Calorimetry) measurements on the filaments have shown that SEBS increases the initial temperature of crystallization, thereby acting as a nucleating agent. The cooling rate of 3D printing, on the other hand, is too fast for PLA, so printed specimens behave almost amorphously. The presence of SEBS increases the impact strength, neck formation appears during the tensile test, and in the bending test, the mixture either suffers partial fracture or only bends without fracture. Samples containing 1% SEBS were selected for further analysis, mixed with 0.06 and 0.1% carbon nanotubes (CNTs), and tested for thermal and mechanical properties. As a result of CNTs, another peak appeared on the DSC curve in addition to the original single-peak crystallization, and the specimens previously completely broken in the mechanical tests suffered partial fractures, and the partially fractured pieces almost completely regained their original shape at the end of the test.Keywords
Funding Information
- European Social Fund Plus (EFOP-3.6.1-16-2016-00014)
This publication has 36 references indexed in Scilit:
- Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief ReviewPolymers, 2019
- Additive manufacturing (3D printing): A review of materials, methods, applications and challengesComposites Part B: Engineering, 2018
- Additive manufacturing of biomaterialsProgress in Materials Science, 2018
- PLA composites: From production to propertiesAdvanced Drug Delivery Reviews, 2016
- Tailoring polylactide (PLA) properties for automotive applications: Effect of addition of designed additives on main mechanical propertiesPolymer Testing, 2014
- Poly(lactic acid) crystallizationProgress in Polymer Science, 2012
- Biodegradable green composites reinforced by the fiber recycling from disposable chopsticksMaterials Science and Engineering: A, 2010
- Preparation and characterization of ternary blends composed of polylactide, poly(ɛ-caprolactone) and starchMaterials Science and Engineering: A, 2009
- Processing technologies for poly(lactic acid)Progress in Polymer Science, 2008
- Toughening PolylactidePolymer Reviews, 2008