Accuracy of the application of mobile technologies for measurements made in headings of the Kłodawa Salt Mine
Open Access
- 23 March 2024
- journal article
- research article
- Published by Walter de Gruyter GmbH in Reports on Geodesy and Geoinformatics
- Vol. 117 (1) , 55-68
Abstract
The “Kłodawa” salt mine, due to geological conditions and continuous salt extraction, is subject to a range of measurements documenting the speed of changes in the geometry of the chambers. Cyclic surveys are conducted under challenging conditions several hundred metres underground. Consequently, measurement methods used for determining the parameters of the ongoing clamping should be of high precision but also be resistant to dense dust (in fields of active mining) and strong gusts (near ventilation shafts). The research presented here concerns the analysis of the possibilities of solutions offered by modern technologies in mine conditions. Test measurements were conducted at observation stations using linear bases stabilized with metal pins. The base points were located in the aisles, ceiling, and bottom of the chamber in Field 1 of “Kłodawa” salt mine at the depth of 600m. Point clouds mapping the object were acquired using a Leica RTC360 3D laser scanner and two mobile devices: Motorola G100 smartphone and iPad Pro with LiDAR technology using the Pix4Dcatch application. The accuracy of the point cloud from the Leica RTC360 3D laser scanner was determined by comparing it with classic measurements taken with a Leica Disto laser rangefinder. The repeatability and accuracy of the point cloud from a smartphone were examined using statistical analysis based on Pearson’s correlation coefficient and cross-correlation. An attempt was also made to approximate the correlation between the obtained errors and two parameters: the number of images and the size of the object.Keywords
This publication has 28 references indexed in Scilit:
- Measurement methodology for surface defects inventory of building wall using smartphone with light detection and ranging sensorMeasurement, 2023
- Using the iPhone's LiDAR technology to capture 3D forensic data at crime and crash scenesForensic Imaging, 2023
- Study the accuracy of digital close range photogrammetry technique software as a measuring toolAlexandria Engineering Journal, 2019
- Defining the Cubature Changes of Historic St. Kinga Chamber in Bochnia Salt Mine, Using Laser Scanning TechnologyE3S Web of Conferences, 2018
- Airborne LiDAR Technology: A Review of Data Collection and Processing SystemsProceedings of the National Academy of Sciences, India Section A: Physical Sciences, 2017
- Accurate measurement with photogrammetry at large sitesJournal of Archaeological Science, 2016
- Inventory of the geometric condition of inanimate nature reserve Crystal Caves in “Wieliczka” Salt MineActa Geodaetica et Geophysica, 2015
- Possibility of convergence measurement of gates in coal mining using terrestrial 3D laser scannerJournal of Sustainable Mining, 2015
- A comparison between photogrammetry and laser scanningISPRS Journal of Photogrammetry and Remote Sensing, 1999
- VII. Mathematical contributions to the theory of evolution.—III. Regression, heredity, and panmixiaPhilosophical Transactions of the Royal Society A, 1896