Abstract
The photon management and light trapping could significantly improve the short-circuit photocurrent densities (JSC) and power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) by scattering of the light or reducing the optical losses. However, it remains challenging to fabricate the textured substrate or window layer in PSCs. In this study, hexagonal-tiled indium tin oxide (ITO) substrates are prepared by a simple and low-cost method in terms of photon management and microstructure. The hexagonal-tiled ITO surfaces not only can increase the absorption of light but also can be beneficial to extraction of interface charge. Photovoltaic device-used hexagonal-tiled ITO substrate with the suitable thickness exhibited a maximum PCE of 18.2%, with the VOC of 1.06 V, JSC of 21.65 mA cm–2, and fill factor of 0.791, which showed an encouraging improvement of over 7.2% in the JSC and a 7.4% enhancement in the PCE compared with the traditional ITO substrate.
Funding Information
  • Ministry of Science and Technology of the People's Republic of China (2016YFC0205002)
  • China Postdoctoral Science Foundation (2016M602286)
  • Huazhong University of Science and Technology (2016JCTD111)
  • National Natural Science Foundation of China (51661135023, 51572070, 51672094)
  • Natural Science Foundation of Guangdong Province (2017A030313342)
  • Shenzhen Science and Technology Plan (JCYJ201005280434A)

This publication has 31 references indexed in Scilit: