Study of the Effect of a Shielding Cylinder on the Torque in a Permanent-Magnet Synchronous Machine Considering Two Torque-Producing Mechanisms
Authors:
- 29 June 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (10) , 1-8
Abstract
Despite an ever-growing interest, a lot of questions related to the design and operation of high-speed permanent-magnet synchronous machines remain unanswered. One aspect of such high-speed machines that requires special attention is the effect of the shielding cylinder (SC), a conductive sleeve that is wrapped around the magnets and which’ goal is to reduce the rotor losses and/or retain the magnets. Therefore, this paper aims at theoretically studying the effect of the SC on the torque production. The study is performed using a 2-D analytical subdomain model that accounts for slotting and the eddy-current reaction field. The torque is divided in two components, the classical torque due to interaction between the magnets and the stator currents and the torque due to interaction with the eddy currents in the SC. This approach is unique and results in a better insight in the machine’s physics.Keywords
This publication has 14 references indexed in Scilit:
- Torque and torque components in high-speed permanent-magnet synchronous machines with a shielding cylinderMathematics and Computers in Simulation, 2016
- 2-D Analytical Subdomain Model of a Slotted PMSM With Shielding CylinderIEEE Transactions on Magnetics, 2014
- Very-High-Speed Slotless Permanent-Magnet Motors: Analytical Modeling, Optimization, Design, and Torque Measurement MethodsIEEE Transactions on Industrial Electronics, 2009
- A Study on the Characteristics Due to Pole-Arc to Pole-Pitch Ratio and Saliency to Improve Torque Performance of IPMSMIEEE Transactions on Magnetics, 2007
- Study of Retaining Sleeve and Conductive Shield and Their Influence on Rotor Loss in High-Speed PM BLDC MotorsIEEE Transactions on Magnetics, 2006
- Reduction of cogging torque in interior-magnet brushless machines2004
- Potentials and limits of high speed PM motors2004
- Design techniques for reducing the cogging torque in surface-mounted PM motorsIEEE Transactions on Industry Applications, 2002
- Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motorsIEEE Transactions on Magnetics, 2001
- Application of a multiobjective minimization technique for reducing the torque ripple in permanent-magnet motorsIEEE Transactions on Magnetics, 1999