Highly reliable nickel-tin transient liquid phase bonding technology for high temperature operational power electronics in electrified vehicles
Authors:
- 1 February 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 478-482
Abstract
This paper presents an approach to nickel-tin transient liquid phase (TLP) bonding that provides high reliability for high temperature operational power electronics in electrified vehicles. The need for automotive power electronics to operate at high temperature presents significant challenges in terms of the packaging and bonding technology used. Transient liquid phase (TLP) bonding is one attachment approach that addresses these challenges. The Ni/Sn TLP bonding process exhibits a number of desirable characteristics, including a good CTE match with silicon and silicon carbide, popularity in conventional power electronics, low cost, and uniform alloy formation. The work herein presents a Ni/Sn TLP bonding technology (ready for high temperature operation up to 200°C) as applied to large size silicon power devices (12 mm × 9 mm). Analysis indicates that the resulting bondline is uniformly composed of Ni 3 Sn 4 alloy throughout. This bonding approach has exhibited excellent reliability for bonded devices after 1000 thermal cycles from -40 to 200°C.Keywords
This publication has 14 references indexed in Scilit:
- High-temperature lead-free solder alternativesMicroelectronic Engineering, 2011
- State of the art of high temperature power electronicsMaterials Science and Engineering: B, 2011
- Ageing defect detection on IGBT power modules by artificial training methods based on pattern recognitionMicroelectronics Reliability, 2011
- Low-Temperature Sintering of Nanoscale Silver Paste for Attaching Large-Area $({>}100~{\rm mm}^{2})$ ChipsIEEE Transactions on Components and Packaging Technologies, 2009
- Design for reliability of power electronics modulesMicroelectronics Reliability, 2009
- Degradation behavior of 600V–200A IGBT modules under power cycling and high temperature environment conditionsMicroelectronics Reliability, 2007
- Transfer of metal MEMS packages using a wafer-level solder transfer techniqueIEEE Transactions on Advanced Packaging, 2005
- Innovative Methodology for Predictive Reliability of Intelligent Power Devices Using Extreme Electro-thermal FatigueMicroelectronics Reliability, 2005
- Electrical characterizations and evaluation of thermo-mechanical stresses of a power module dedicated to high temperature applications2005
- Pressure-assisted low-temperature sintering of silver paste as an alternative die-attach solution to solder reflowIEEE Transactions on Electronics Packaging Manufacturing, 2002