Mechanical and thermal properties of polyethylene/carbon nanofiber composites produced by rotational molding
- 19 November 2019
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 41 (4) , 1224-1233
Abstract
Nanocomposites based on carbon nanofibers (CNFs) and linear medium density polyethylene (LMDPE) were prepared by rotational molding. In particular, a simple dry‐blending process was used to add different CNF contents (0, 0.01, 0.1, and 1.0 wt%). To improve the fiber‐matrix adhesion, the CNF were treated by an oxygen cold plasma and the level of surface modification was analyzed by differential scanning calorimetry (DSC) and X‐ray photoelectron spectroscopy (XPS). From the samples produced a complete set of morphological, mechanical, rheological, and thermal characterization was performed. By following the internal air temperature while rotomolding, it was possible to detect the LMDPE melting and crystallization temperature and the values were confirmed by DSC. On the other hand, the XPS results show that the plasma treatment increased the CNF oxygen content and possibly the surface roughness. In general, the mechanical properties of the nanocomposites were improved by the addition of low CNF content: impact strength (30%), tensile modulus (20%), tensile strength (8%), elongation at break (35%), and toughness (70%).Keywords
This publication has 44 references indexed in Scilit:
- Rotomolded antistatic and flame-retarded graphite nanocompositesJournal of Thermoplastic Composite Materials, 2017
- Plasma treatment of carbon fiber on the tribological property of polyimide compositeSurface and Interface Analysis, 2017
- Rotomolded polyethylene‐agave fiber composites: Effect of fiber surface treatment on the mechanical propertiesPolymer Engineering & Science, 2016
- Carbon Nanofiber Reinforced Polymer Composites2016
- Mechanical properties and creep behavior of rotationally moldable linear low density polyethylene‐fumed silica nanocompositesPolymer Composites, 2015
- Rheological and dynamic mechanical characteristics of rotationally moldable linear low‐density polyethylene fumed silica nanocompositesPolymer Composites, 2015
- Foams and Wood Composite Foams Produced by RotomoldingCellular Polymers, 2013
- Rotational Molding of Polyamide-6 Nanocomposites with Improved Flame RetardancyInternational Polymer Processing, 2012
- Review of the mechanical properties of carbon nanofiber/polymer compositesComposites Part A: Applied Science and Manufacturing, 2011
- Particulate reinforced rotationally moulded polyethylene composites – Mixing methods and mechanical propertiesComposites Science and Technology, 2006