Outer rotor wound field flux switching machine for In‐wheel direct drive application
Open Access
- 18 April 2019
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 13 (6) , 757-765
Abstract
Nowadays the flux switching machines offer pivotal role in high speed applications. The flux sources (field excitation coil and armature winding or permanent magnet) are confined to the stator leaving rotor completely passive, and thus making the flux switching machine (FSM) more suitable for industrial applications. This paper emphasizes salient rotor pole and non‐overlapping windings embedded in electrical machine design possess some pertinent features such as reduced copper losses, low‐cost, and usage in high speed applications. The proposed design is analyzed for coil test analysis and flux linkage and torque. On the basis of the analysis performed, it is clear that 12‐slot/13‐pole has low cogging torque, high flux linkage, and maximum torque, compared with other topologies of outer rotor field excitation FSM. A deterministic optimization technique is adopted to enhance the performance of 12‐slot/13‐pole design. Further, finite element analysis (FEA) results are verified through Global Reluctance Network (GRN) methodology, which show close resemblance with error less than 1.2%. Hence, it validates the proposed design for outer rotor field excitation FSM direct drive application. The proposed design for hybrid electric vehicle torque characteristic is compared with existing interior permanent magnet synchronous machine (IPMSM) and 6‐slot/7‐pole wound field flux switching machine (WFFSM).Keywords
This publication has 19 references indexed in Scilit:
- Development of a 20-Pole–24-Slot SPMSM With Consequent Pole Rotor for In-Wheel Direct DriveIEEE Transactions on Industrial Electronics, 2015
- Electromagnetic Performance of Nonoverlapping Stator Wound Field Synchronous Machine With Salient Pole RotorIEEE Transactions on Magnetics, 2015
- Investigation of an Improved Hybrid-Excitation Flux-Switching Brushless Machine for HEV/EV ApplicationsIEEE Transactions on Industry Applications, 2015
- Investigation of Nonoverlapping Stator Wound-Field Synchronous MachinesIEEE Transactions on Energy Conversion, 2015
- Thermal Modeling and Analysis of a Double-Stator Switched Reluctance MotorIEEE Transactions on Energy Conversion, 2015
- The Understanding of Reversed Domain Nucleation and Pinning Mechanism in Hot Deformed Nd2Fe14B MagnetsIEEE Transactions on Magnetics, 2014
- Comparison of Low-Cost Single-Phase Wound-Field Switched-Flux MachinesIEEE Transactions on Industry Applications, 2014
- Coil test analysis of Wound-field three-phase flux switching machine with non-overlapping winding and salient rotor2014
- Design and Analysis of a Magnetless Flux-Switching DC-Excited Machine for Wind Power GenerationJournal of International Council on Electrical Engineering, 2014
- Energy Management and Driving Strategy for In-Wheel Motor Electric Ground Vehicles With Terrain Profile PreviewIEEE Transactions on Industrial Informatics, 2013