Renewable Resources as Reinforcement of Polymeric Matrices: Composites Based on Phenolic Thermosets and Chemically Modified Sisal Fibers
- 10 September 2007
- journal article
- research article
- Published by Wiley in Macromolecular Bioscience
- Vol. 7 (9-10) , 1121-1131
Abstract
Lignocellulosic materials can significantly contribute to the development of composites, since it is possible to chemically and/or physically modify their main components, cellulose, hemicelluloses and lignin. This may result in materials more stable and with more uniform properties. It has previously been shown that chemically modified sisal fibers by ClO2 oxidation and reaction with FA and PFA presented a thin coating layer of PFA on their surface. FA and PFA were chosen as reagents because these alcohols can be obtained from renewable sources. In the present work, the effects of the polymeric coating layer as coupling agent in phenolic/sisal fibers composites were studied. For a more detailed characterization of the fibers, IGC was used to evaluate the changes that occurred at the sisal fibers surface after the chemical modifications. The dispersive and acid‐base properties of untreated and treated sisal fibers surfaces were determined. Biodegradation experiments were also carried out. In a complementary study, another PFA modification was made on sisal fibers, using K2Cr2O7 as oxidizing agent. In this case the oxidation effects involve mainly the cellulose polymer instead of lignin, as observed when the oxidation was carried out with ClO2. The SEM images showed that the oxidation of sisal fibers followed by reaction with FA or PFA favored the fiber/phenolic matrix interaction at the interface. However, because the fibers were partially degraded by the chemical treatment, the impact strength of the sisal‐reinforced composites decreased. By contrast, the chemical modification of fibers led to an increase of the water diffusion coefficient and to a decrease of the water absorption of the composites reinforced with modified fibers. The latter property is very important for certain applications, such as in the automotive industry. magnified imageKeywords
This publication has 26 references indexed in Scilit:
- Mechanical properties of woven banana fibre reinforced epoxy compositesMaterials & Design (1980-2015), 2006
- Thermoplastic polymers reinforced with fibrous agricultural residuesPolymer Degradation and Stability, 2005
- Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC)Journal of Applied Polymer Science, 2005
- Radicalization of Lignocellulosic Fibers, Related Structural and Morphological ChangesBiomacromolecules, 2005
- Coconut fibre reinforced polyethylene composites: effect of natural waxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of compositesComposites Science and Technology, 2005
- Composites of low-density polyethylene and short sisal fibres: the effect of wax addition and peroxide treatment on thermal propertiesThermochimica Acta, 2005
- Sugar cane bagasse and curaua lignins oxidized by chlorine dioxide and reacted with furfuryl alcohol: characterization and stabilityPolymer Degradation and Stability, 2004
- A Review on Pineapple Leaf Fibers, Sisal Fibers and Their BiocompositesMacromolecular Materials and Engineering, 2004
- Phenolic Thermoset Matrix Reinforced with Sugar Cane Bagasse Fibers: Attempt to Develop a New Fiber Surface Chemical Modification Involving Formation of Quinones Followed by Reaction with Furfuryl AlcoholMacromolecular Materials and Engineering, 2004
- Effects of the moisture and fiber content on the mechanical properties of biodegradable polymer–sisal fiber biocompositesJournal of Applied Polymer Science, 2004