Investigation on Electrochemical and Physical Properties of NanoCrN/TiN Multilayer Coating on AISI 304 Stainless Steel as Bipolar Plate for PEMFCs
Authors:
- 29 September 2023
- journal article
- research article
- Published by Pleiades Publishing Ltd in Russian Journal of Electrochemistry
- Vol. 59 (9) , 697-706
Abstract
Nano Cr–N/Ti–N multilayers coating is deposited on the SS304 surface by cathodic arc-PVD to enhance electrical conductivity and corrosion resistance of SS304 applied as a bipolar plate in PEMFCs. Afterward, the thickness, composition, corrosion rate, interfacial contact resistance and hydrophobicity of the samples are identified. According to the findings, the nano Cr–N/Ti–N multilayer can considerably increase the corrosion resistance due to the enhanced numbers of interfaces and preparing dense coating. The corrosion current density of the coating in the experimentally prepared cathodic solution of the fuel cell is 0.187 μA cm–2, which satisfies targets set by the DOE 2025 (i.e., −2). The total porosity of coating is 0.0033% which illustrates the very dense nano multilayer PVD deposition. Moreover, the contact angle results indicate that Cr–N/Ti–N can enhance the hydrophobicity of electrode surface. The ICR measurements between the carbon paper and Cr–N/Ti–N coating before and after polarization shows very low value, which is in accordance with the U.S. DOE requirement (≤10 mΩ cm2).Keywords
This publication has 30 references indexed in Scilit:
- A nanocrystalline zirconium carbide coating as a functional corrosion-resistant barrier for polymer electrolyte membrane fuel cell applicationJournal of Power Sources, 2015
- Cell performance distribution in a low-temperature proton exchange membrane fuel cell stack during propene contaminationJournal of Applied Electrochemistry, 2015
- Corrosion and electrical properties of CrN- and TiN-coated 316L stainless steel used as bipolar plates for polymer electrolyte membrane fuel cellsThin Solid Films, 2013
- Improvement of corrosion and electrical conductivity of 316L stainless steel as bipolar plate by TiN nanoparticle implantation using plasma focusInternational Journal of Hydrogen Energy, 2012
- Niobized AISI 304 stainless steel bipolar plate for proton exchange membrane fuel cellJournal of Power Sources, 2012
- Corrosion protection of CrN/TiN multi-coating for bipolar plate of polymer electrolyte membrane fuel cellThin Solid Films, 2011
- Chromium nitride/Cr coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cellJournal of Power Sources, 2011
- Electrochemical properties of TiNCrN-coated bipolar plates in polymer electrolyte membrane fuel cell environmentThin Solid Films, 2010
- Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cellsJournal of Power Sources, 2009
- Optimized Cr-nitride film on 316L stainless steel as proton exchange membrane fuel cell bipolar plateInternational Journal of Hydrogen Energy, 2009