Relationship between cell morphology and impact strength of microcellular foamed high‐density polyethylene/polypropylene blends
- 16 August 2004
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 44 (8) , 1551-1560
Abstract
Polymer blends, such as those resulting from recycling postconsumer plastics, often have poor mechanical properties. Microcellular foams have been shown to have the potential to improve properties, and permit higher‐value uses of mixed polymer streams. In this study, the effects of microcellular batch processing conditions (foaming time and temperature) and HDPE/PP blend compositions on the cell morphology (the average cell size and cell‐population density) and impact strength were studied. Optical microscopy was used to investigate the miscibility and crystalline morphology of the HDPE/PP blends. Pure HDPE and PP did not foam well at any processing conditions. Blending facilitated the formation of microcellular structures in polyolefins because of the poorly bonded interfaces of immiscible HDPE/PP blends, which favored cell nucleation. The experimental results indicated that well‐developed microcellular structures are produced in HDPE/PP blends at ratios of 50:50 and 30:70. The cell morphology had a strong relationship with the impact strength of foamed samples. Improvement in impact strength was associated with well‐developed microcellular morphology. Polym. Eng. Sci. 44:1551–1560, 2004. © 2004 Society of Plastics Engineers.Keywords
This publication has 23 references indexed in Scilit:
- Microcellular foam of polymer blends of HDPE/PP and their composites with wood fiberJournal of Applied Polymer Science, 2003
- Effect of recycled polypropylene on polypropylene/high‐density polyethylene blendsJournal of Applied Polymer Science, 2001
- Relationship of fracture behavior and morphology in polyolefin blendsPolymer Engineering & Science, 1999
- Cell morphology and property relationships of microcellular foamed pvc/wood‐fiber compositesPolymer Engineering & Science, 1998
- Processing and characterization of microcellular foamed high‐density polythylene/isotactic polypropylene blendsPolymer Engineering & Science, 1998
- Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymersPolymer Engineering & Science, 1996
- i-PP/HDPE blends. III. Characterization and compatibilization at loweri-PP contentsJournal of Applied Polymer Science, 1996
- iPP/HDPE blends. II. Modification with EPDM and EVAJournal of Applied Polymer Science, 1996
- iPP/HDPE blends: Interactions at lower HDPE contentsJournal of Applied Polymer Science, 1995
- THE NUCLEATION OF MICROCELLULAR FOAMS IN SEMI CRYSTALLINE THERMOPLASTICS∗Materials and Manufacturing Processes, 1989